Do I need a single pole or double pole thermostat?
You can’t turn off a single pole thermostat like a double pole one. Therefore, a single-pole device will always consume energy, whereas a double-pole thermostat can cut your energy costs. Safety. A single-pole device will automatically turn on when the indoor temperature falls below the minimal settings.
What’s the difference between a single pole and double pole thermostat?
If you see two wires coming out of it in the back you have a single pole. If there are four wires, you have a double pole. If you have more than four wires coming out of your thermostat, you most likely have a low voltage one, which would be used to control a central furnace, boiler, or something similar.
How many wires does a double pole thermostat have?
four wires
Just like a single pole thermostat, a double pole thermostat is wired directly to the main circuit breaker but will have four wires instead of two. This allows for the thermostat to operate on two separate circuits.
How do you wire a single pole thermostat?
Make sure to connect the ground to the thermostat or wiring box, if available….For single-pole thermostats:
- Using a wire connector, connect the hot supply wire to the thermostat wires.
- Connect the remaining thermostat wire, typically marked “T1” or “Load,” to the same color supply wire feeding the baseboard heater.
How many wires do I need for thermostat?
The most basic thermostat has 2 wires; usually a red and a white wire. Two wire thermostat wiring is used for furnaces only and usually doesn’t need a “C” or “Common” wire. That’s why we only need two wires: Red wire for power (24h).
Will MYSA work with 2 wires?
If you are certain that your gang box only has two wires, Mysa is not compatible with that system. However, just because this one gang box has two wires, it doesn’t mean that all the other gang boxes in your house have two wires. Be sure to check all the other gang wires in your home.
What does L1 and T1 mean on a thermostat?
L1 means line 1, L2 means line 2, T1 means Thermostat 1, and T2 means thermostat 2.