How much is a 1984 xr500r worth?
Values
| Excellent | $2,070 |
| Very Good | $1,510 |
| Good | $1,015 |
| Fair | $710 |
| Poor | N/A |
Why did Honda stop making the XR650R?
Honda made the XR650R from 2000 until 2007 when they made some big changes to their off-road motorcycle lineup. Honda stopped making it because they came out with CRF450X, which is a lighter, faster, and better-performing off-road race bike.
When did Honda stop making the XR200?
1984
The XR200, a development of the XL185 trail bike, was produced from 1980 until 1984. The XR200 had a modestly enlarged ohc 2-valve 6-speed air-cooled engine with kick-start only.
What’s the difference between a Honda XR and CRF?
XR’s have a higher oil capacity than the CRF’s. CRF’s are much higher spirited 4-stroke race bikes with higher maintenance demands. Suspension on CRF’s are tuned with the track and racing in mind and tend to be stiffer than the XR’s. The only CRF that comes with a light is the 250X.
What dirt bike was used in Terminator 2?
Edward Furlong “John Connor” 1990 Honda XR100R motorcycle used in Terminator 2: Judgment Day. Some of the most thrilling sequences in T2 are when the Terminator (Arnold Schwarzenegger) and the T-1000 (Robert Patrick) converge on John Connor (Edward Furlong) at the shopping mall and a chase ensues.
How fast can the XR650R go?
XR650R horsepower is 61.2, and the top speed is 98 mph.
How much does a Honda XR650R weight?
Honda XR 650R
| Make Model | Honda XR 650R |
|---|---|
| Ground Clearance: | 305 mm / 12.0 in |
| Dry Weight | 133 kg / 293 lbs |
| Wet Weight | 144.0 kg / 317 lbs |
| Fuel Capacity | 9.8 Liters / 2.6 US gal |
Is XR200 good for trail?
Making the XR200 an even better dirt bike for trail riding Any XR200R is a great choice if you want a lightweight, durable, easy to ride trail bike.
How many gears does a XR200 have?
| Honda XR 200 Engine and Transmission Technical Data | |
|---|---|
| Engine oil capacity | 0.90 litres (0.95 quarts) |
| Exhaust system | – |
| Gearbox | 5-speed |
| Transmission type, final drive ratio | Belt |
What year did Honda go from XR to CRF?
The first big change for the XRs came in 1985 with the introduction of the single shock and plastic gas tank. In 1992 they received an electronic ignition that made the world a happier place. In 2001 they received a complete body work makeover and again in 2004 with the name being changed to CRF.
What does the CRF stand for in Honda?
Posted June 12, 2005. CR stands for close ratio, refering to the type of bike, (constantly having to shift, less powerband) Also, XR stands for extended ratio,(being able to ride in same gear, broud powerband) THus,CRF means close ratio fourstroke.
What are the features of a 1985 Honda cr500r?
The 1985 CR500R came in Flash Red. The “500” decal was red and blue. The seat, fork boots, and shock springs were blue. The number plate panels were yellow. The wheel rims were silver. The carburetor used a flat slide. The rear brake was a drum, a disc was not there until 1987.
What is the weight of a Honda XR 500?
The Honda XR 500 weighs 123.0 kg (271.2 pounds). How tall (seat height) is a Honda XR 500? The Honda XR 500 seat height is 880 mm (34.6 inches) If adjustable, lowest setting. How many gears does a Honda XR 500 have?
What is the difference between a 1982 and 1983 XR500R?
The 1982 XR 500RC was very similar to the 1981 RB apart from decal and trim changes. The 1983 XR500R was thoroughly revised with a new dry-sump RFVC 5-speed engine which was lighter and more powerful than the older engine. Induction was by 2 carburetors, the first in use until 1/4 throttle, whereupon the second started to take effect.
When did the Honda XR500RE 500cc come out?
The 1984 XR500RE model was the last 500cc XR, being superseded in 1985 by the larger Honda XR 600RF. The XR 600R was used in Baja races. It was introduced in 1985, and was updated in 1988 when the original dual progressively opening carburetors were replaced with a larger single carburetor and the rear brake was updated to a disc.