How do I update my Buffalo NAS firmware?

Go to the Buffalo downloads page and enter your model number. Scroll to the firmware section and select the firmware update utility for Mac. Once the download finishes, click on the downloaded file in the downloads section of the dock. Double-click the “update” icon.

How do I update my Buffalo router?

Log onto the router with admin and admin password. Click on Update AirStation Firmware or Advanced / Admin Config, then Firmware Update/Upgrade. To update the firmware, press the Browse button and search for the downloaded firmware file, which you’ve probably downloaded to your desktop.

What OS does Buffalo NAS use?

Buffalo network-attached storage series

How do I reset Buffalo TeraStation to factory defaults?

To reset the TeraStation to its factory default settings, power on the unit and hold down the reset button for five seconds. In the Web Admin interface, you can initialize almost all settings, including things that are not initialized from the reset button without the data saved in the TeraStation.

How do I enable SMB2 on Buffalo NAS?

Before taking this step, make sure that SMB version 2 is enabled on the NAS.

1. Open the web interface click the configuration button next to “SMB”.
2. Note whether the SMB2 protocol is enabled. If it isn’t, click the “Edit” button.
3. Click the radio button to enable the SMB2 protocol and click the “OK” button.

What is the default password for Buffalo TeraStation?

Turning the TeraStation On and Off Note: The default username and password are “admin” and “password”.

How do I reset Buffalo LinkStation?

The LinkStation will be restored to its factory default settings….Initializing from Settings

1. In Settings, navigate to [System] – [Restore/Erase].
2. Click [Restore LinkStation].
3. The “Confirm Operation” screen will open. Enter the displayed number within 60 seconds, then click [Apply].

Where is Buffalo NAS made?

The Japanese company is recognized as the leading computer peripheral manufacturer in their home country. Headquartered in Japan, Buffalo has offices in The Netherlands, Ireland, USA and Taiwan.

What is the default password for Buffalo LinkStation?

The default username and password are “admin” and “password”. From Settings, click on the “Network” tab on the left and then click on the widget icon to the right of “IP Address”.

How do I get Buffalo NAS on Windows 10?

Mapping a Drive to a Buffalo NAS in Windows

1. Open NAS Navigator.
2. Right-click on the NAS.
3. Select “Browse Shares” from the pop-up menu.
4. Right-click on the shared folder you want to map to a drive letter.
5. Select “Map network drive…” from the pop-up menu.
6. Click on the drop-down menu to change the drive letter if desired.

Can’t see NAS drive on Windows 10?

[FIXED]: NAS Device Not Visible on Windows 10

1. Click the Windows icon (Start Menu) and select Settings.
2. On the Windows Settings window, select Network & Internet to open a Status window.
3. Click Change Adapter Options.
4. Right-click an adapter you use for accessing the NAS device and click Properties.

How do I reset my Buffalo TeraStation admin password?

TeraStation TGL / HTGL / RHTGL / ITGL / RITGL / DHTGL / TS-X series

1. Open the front panel and look under the left corner of the LCD screen for the red Init button.
2. Press and hold the red button for 10 seconds. The device will start beeping. The password and IP address has been changed to default.