In some occasions, you will have to write an essay in the extremely short amount of time on the exam in college or high school. Also, you may be a little bit of a procrastinator, and find yourself in a situation when the paper is due tomorrow morning, and you have not even chosen the topic yet. Even though a last-minute essay cannot look as great as a work prepared successively and carefully within the whole time given, you still have a chance to submit a decent paper. The working process will require your full attention and a lot of effort, even if you are assigned a simple essay. However, if you learn the next few tips, the essay writing will seem significantly easier and feasible even when you are short on time.

Firstly, clean up your working space to get started. Make sure you have everything you need on the table, take a pen, a few sticky notes, your laptop, and read through the assignment requirements. In case no prompt is given, search for good essay topics, and pick a few uncommon and interesting ones you will be able to write about. Making a final choice, think which topic is the most relevant to your current studies and will not take too much to research.

Afterwards, look for the most trustworthy sources or the ones you are certainly allowed to use. If you are not sure, access the online library or any free services where you can look for the books and articles for your essay. Use sticky notes to write down the information and put them in front of you to see how much data has been gathered and if you need to continue researching. Reread these notes from time to time and cross out the info you do not find relevant anymore.

When you have the data you need to produce a quality work, it is crucial to think about the structure of the future paper. If you are not sure how to write an essay outline properly, check what your essay type is first. Each type is organized differently, so you need to look up the structure every time you are given an essay homework. You can also search for an example of the essay on your topic, and adhere to its outline. No matter what kind of essay you are going to write, it is important to start with a thesis statement. It should declare what problem you will review in the paper, and which facts or arguments you will use to do it professionally. As these arguments will be discussed in the main part of the essay, outline the body paragraphs and put down a few sentences with the rough description of each paragraph. Think of the way you will engage the reader in the introduction, and which thought will be conclusive for the paper. When the direction of the work is clear from the outline, use it to draft the first version of the essay.

If you are not used to model essay writing, do not worry - your draft should not necessarily look like a masterpiece. It is only the depiction of your thoughts, and as you will have them written down, it will be easier to create a good essay. There is no best way to write an essay, so trust the working methods you usually use. You may like taking short breaks once in a few minutes, or write everything in one sit - just make sure to keep the focus on writing and avoid the urge to call a friend or watch something online. Thus, you will finish the paper faster, and will not feel guilty for engaging in other activities afterwards.

Do not forget to go through the essay a few times after the completion. Everyone makes typos and mistakes by accident, but it is about you to find and fix them before your teacher does. If you need help with an essay editing, try asking a friend or a family member to read and analyze your work. Also, you can order editing services in case your paper needs to be perfectly polished so that you can submit an ideal essay and get an excellent grade.

As these steps are simple to follow, you will not have any problems coping with an essay on time. Try the whole procedure at least once, and you will not have to use any other tips preparing an essay paper during your studies!

Which stain is used for staining reticulin Fibres?

Ammoniacal silver stains
Ammoniacal silver stains are most commonly used for reticular fiber and basement membrane staining.

How do you stain reticulin?

Reticulin fibers are agyrophilic, meaning that these tissue elements will stain black with a silver solution using the aid of a chemical reducer, which brings the silver into a visible form. This silver staining process is known as silver impregnation.

For which purpose reticulin stain is done?

Stain of reticulin is a staining that stains the reticulinic fibers of the stroma and makes it possible to specify the architecture of the tumors (as for example the follicular architecture). It is very useful in cases where the tumor is necrotic.

What is gomori method?

Gomori (1939) described a method of demonstrating alkaline phosphatase. activity in tissue slides. This method consists in incubating the fixed tissue. slides with buffered solution of a phosphate ester and a calcium salt.

What does gomori trichrome stain?

Gomori Trichrome Stain is a histological stain used on muscle tissue and can be used to test for certain forms of mitochondrial myopathy. Gomori Trichrome Stain will stain muscle fibers and cytoplasm in red, nuclei in black and collagen containing connective tissues in blue.

Which method is used to demonstrate reticulin fibers?

Gordon and Sweet’s silver staining method
The Gordon and Sweet’s silver staining method is used to demonstrate reticular (retic) fibers. This method relies on the impregnation of retic fibers with silver through oxidation and reduction. The tissue is first oxidized using potassium permanganate to enhance subsequent staining.

Which stain is best for glycogen?

The selective staining of glycogen by Best’s Carmine and the other dyes used in a similar manner (e.g. Alizarin Brilliant Blue BS, Alizarin Red S, Gallein and Haematoxylin) is due to hydrogen bonding between phenolate (−O−) groups of the dye and glycogen hydroxyl groups.

What is reticulin stain in bone marrow?

Reticulin is a normal component of the bone marrow stroma and can be detected with a reticulin stain in 73% to 81% of healthy subjects. 16-19. Increased reticulin staining (reticulin fibrosis) is associated with many benign conditions as well as some malignant diseases.

How does gomori trichrome stain work?

The principle of Gomori trichrome staining is based on single-step staining. A plasma dye (2R chromotropic) and connective tissue fiber dye (fast green FCF, light green or aniline blue) are combined in a solution of phosphotungstic acid in which glacial acetic acid is added.

What is GMS Stain used for?

Grocott methenamine silver (GMS) stain is commonly used for the identification of fungi on cytosmears and tissue sections. It imparts a black color to the fungal profiles and a pale green color to the background. It stains all pathogenic and nonpathogenic fungi and melanin.

What is Van Gieson stain used for?

Van Gieson’s trichrome is used for the differentiation between collagen and smooth muscle in tumors and to demonstrate the increase in the amount of collagen in these pathologies.

What stain is used to stain collagen?

Mason’s Trichrome stain is used to highlight connective tissue fibers in a tissue section. Collagen fibers are stained a blue hue, nuclei a blue-black, and cytoplasm, keratin, and muscle fibers a range of pink to red hues. AZAN Trichrome stain is used to highlight collagen fibers within a tissue section.

What is Gomori’s one-step trichrome?

PRINCIPLE: Gomori’s one-step trichrome is a staining procedure that combines the plasma stain (chromotrope 2R) and connective fiber stain (fast green FCF) in a phosphotungstic acid solution to which glacial acetic acid has been added.

What is gomorri’s technique?

Gomorri’s technique involves the impregnation of silver for the demonstration of reticular fibres. Since the reticular fibres have low affinity for silver salts, a suitable pretreatment in order to enhance the selectivity to impregnation is required.

What is a reticular fibre?

Reticular fibre is the type of connective tissue composed of type III collagen secreted by reticular cells. Gomorri’s technique involves the impregnation of silver for the demonstration of reticular fibres.

How to increase the selectivity of silver salts to impregnation in reticular fibres?

Since the reticular fibres have low affinity for silver salts, a suitable pretreatment in order to enhance the selectivity to impregnation is required. Treatment with silver solution has two fold effects :