How do I add a Zebra printer to UPS WorldShip?
If Zebra is not visible on the Install the Printer Driver window:
- Select Have Disk and then open the Browse window.
- Look for the directory where WorldShip printer drivers are installed (usually UPS/WSTD/FOSS/Drivers/Eltron/ZBRN), select either the 32-bit or 64-bit folder, and then select the ZBRN.
How do I add a thermal printer to WorldShip?
Window (if available) The Printing Setup tab on the System Preferences Editor window appears. In Printer Type click the down arrow and select Label. Click Add.
What Printers work with WorldShip?
Compatible Thermal Printer Models
UPS.com, CampusShip and WorldShip Supported Printers | Additional WorldShip Supported Printers |
---|---|
UPS.com, CampusShip and WorldShip Supported PrintersHoneywell Intermec Thermal Printer PM43A** | Additional WorldShip Supported Printers |
What labels are compatible with Zebra GK420d?
Zebra GK420d printers are only compatible with direct thermal labels which do NOT require the use of a thermal transfer ribbon to print an image. This makes the printer perfect for printing labels which do not need to have a long life or applications not involving long term exposure to sunlight or extreme heat.
How do I add a thermal printer to UPS?
Installing the UPS Thermal Printer Driver with Windows. Download the UPS Thermal Printer Driver….
- Install your thermal printer.
- Enable the UPS Printer Applet.
- Set your browser’s pop-up blocker to accept pop-up windows from ups.com. UPS Internet Shipping and CampusShip use pop-up windows to display labels for printing.
What thermal printers work with UPS?
UPS Internet Shipping will work with the following UPS thermal printer models:
- Bixolon SRP 770III.
- Eltron 2442.
- Eltron 2543.
- Eltron 2844.
- OKI Data LD620.
- Zebra S4M.
- Zebra ZP450.
- Zebra ZT230.
How do I get a free thermal printer from UPS?
Once you have your UPS.com ID, you will need to call UPS to get your free UPS thermal printer. You can call the UPS customer service center on 1–800–742–5877 or use 1–800–833–0056 if you are hearing impaired and need TTY/TDD access.
What size labels for GK420d?
The Zebra GK420d printer has a maximum label width of 102mm – that is the width of the label from left to right as it exits the printer.
How do I change the label size on my Zebra printer?
- Click on the Windows start button.
- Click [Devices and Printers].
- Right click on your Zebra printer and click [Printer properties].
- Click [Preferences…].
- Under Size, change the label size to match with your thermal labels. You can change the unit in Paper Format, if required. Click [OK] once completed.
How do I print UPS labels on thermal printer?
1. Setting up UPS shipping to print to your thermal printer
- Click Edit under the Shipping section.
- Scroll down to the Printing section and expand it by clicking on it.
- Ensure that Print Label Instructions and Print for all labels in a shipment are selected.
- Click Save to save the changes.
How do I connect my thermal printer to UPS?
What is the replacement model for the gk420d?
Heads up – ZD420d is the replacement model for GK420d. You’ll be able to get it for about the same price. This person is a verified professional. Verify your account to enable IT peers to see that you are a professional.
How do I resume printing on the gk420d™?
• Follow the instructions for Loading Roll Mediaon page 11 in the Getting Started section, and then press the Feed button to resume printing. The printhead is open. • Close the top cover and then press the Feed button to resume printing. Troubleshooting Status Light Error Resolutions 62 980608-001 Rev. C GK420d™ User Guide 8/4/10 6.
What is the hexadecimal of the dump mode on a gk420d?
Troubleshooting69 Communications Diagnostics 8/4/10 GK420d™ User Guide 980608-001 Rev. C The following example of a communications DUMP mode printed out. The printout displays hexadecimal data 00h-FFh (0-255 decimal) with a unique character for each hexadecimal value displayed above the hexadecimal data.
How do you load a media roll on a gk420d?
Pull the media gu ides open with your free hand and place the media roll on the roll holders and release the guides. Orient the media roll so that its printing surface will face up as it passes over the platen (drive) roller. Getting Started13 Loading Roll Media 8/4/10 GK420d™ User Guide 980608-001 Rev. C 3.