In some occasions, you will have to write an essay in the extremely short amount of time on the exam in college or high school. Also, you may be a little bit of a procrastinator, and find yourself in a situation when the paper is due tomorrow morning, and you have not even chosen the topic yet. Even though a last-minute essay cannot look as great as a work prepared successively and carefully within the whole time given, you still have a chance to submit a decent paper. The working process will require your full attention and a lot of effort, even if you are assigned a simple essay. However, if you learn the next few tips, the essay writing will seem significantly easier and feasible even when you are short on time.

Firstly, clean up your working space to get started. Make sure you have everything you need on the table, take a pen, a few sticky notes, your laptop, and read through the assignment requirements. In case no prompt is given, search for good essay topics, and pick a few uncommon and interesting ones you will be able to write about. Making a final choice, think which topic is the most relevant to your current studies and will not take too much to research.

Afterwards, look for the most trustworthy sources or the ones you are certainly allowed to use. If you are not sure, access the online library or any free services where you can look for the books and articles for your essay. Use sticky notes to write down the information and put them in front of you to see how much data has been gathered and if you need to continue researching. Reread these notes from time to time and cross out the info you do not find relevant anymore.

When you have the data you need to produce a quality work, it is crucial to think about the structure of the future paper. If you are not sure how to write an essay outline properly, check what your essay type is first. Each type is organized differently, so you need to look up the structure every time you are given an essay homework. You can also search for an example of the essay on your topic, and adhere to its outline. No matter what kind of essay you are going to write, it is important to start with a thesis statement. It should declare what problem you will review in the paper, and which facts or arguments you will use to do it professionally. As these arguments will be discussed in the main part of the essay, outline the body paragraphs and put down a few sentences with the rough description of each paragraph. Think of the way you will engage the reader in the introduction, and which thought will be conclusive for the paper. When the direction of the work is clear from the outline, use it to draft the first version of the essay.

If you are not used to model essay writing, do not worry - your draft should not necessarily look like a masterpiece. It is only the depiction of your thoughts, and as you will have them written down, it will be easier to create a good essay. There is no best way to write an essay, so trust the working methods you usually use. You may like taking short breaks once in a few minutes, or write everything in one sit - just make sure to keep the focus on writing and avoid the urge to call a friend or watch something online. Thus, you will finish the paper faster, and will not feel guilty for engaging in other activities afterwards.

Do not forget to go through the essay a few times after the completion. Everyone makes typos and mistakes by accident, but it is about you to find and fix them before your teacher does. If you need help with an essay editing, try asking a friend or a family member to read and analyze your work. Also, you can order editing services in case your paper needs to be perfectly polished so that you can submit an ideal essay and get an excellent grade.

As these steps are simple to follow, you will not have any problems coping with an essay on time. Try the whole procedure at least once, and you will not have to use any other tips preparing an essay paper during your studies!

Is cabosil hydrophilic?

Cabot Cab-O-SilĀ® TS-720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. The treatment renders it extremely hydrophobic, with very different properties to untreated silica grades like M5.

Is cabosil hydrophobic?

CAB-O-SIL TS-720 fumed silica is a medium surface area fumed silica which has been surface treated with polydimethylsiloxane (PDMS). This surface treatment results in a hydrophobic silica with a very different performance than untreated silica.

What is hydrophilic fumed silica?

What Does Hydrophilic Fumed Silica Mean? This is a silica-based polymer with a tendency of absorbing moisture. It is used in high-technology fields or as an ingredient in paints, coatings, electronics and optical fibers industries.

What is CAB-O-SIL used for?

CAB-O-SIL fumed silica performs well in a range of base oils and is widely used in dielectric greases, damping greases, vacuum greases and food grade greases. The use of lubricating greases is essential across a wide range of industries.

Is CAB O SIL hydrophobic?

Our CAB-O-SILĀ® hydrophobic fumed silica products are used around the world to meet our customers’ challenging performance requirements.

What is cabosil powder?

Fumed Silica (aka Cabosil) is an extremely fine powder used to thicken virtually every liquid material. It is typically used to thicken resin, paint, dyes, and even water.

Is all fumed silica hydrophobic?

Fumed Silica – Hydrophilic and Hydrophobic With a unique range of both hydrophilic and hydrophobic grades available the number of applications are endless. Fumed (pyrogenic) silica is composed of synthetic silicon dioxide (SiO2) which is entirely amorphous, eliminating the risks posed by crystalline silica.

What is the difference between silica gel and fumed silica?

The difference between fumed silica and sol-gel silica nanoparticle is the synthesis method followed, for instance, fumed silica particles or nanoparticles are synthesized by the thermal pyrolysis method, where silicon tetrachloride (SiCl4) is made to react with oxygen in a flame, and the product SiO2 is obtained where …

What is CAB O SIL made from?

Cab-O-Sil is an aerosol silica that can be mixed with most liquids to form a thick colloidal suspension. Also called Fumed silica, it is a very light, fluffy white powder that is made by hydrogen-oxygen furnace combustion of silicon tetrachloride.

Is cabosil toxic?

Skin Contact: May cause mechanical irritation and skin drying. Avoid contact with skin. No cases of sensitization in humans have been reported. Inhalation: Dust may be irritating to respiratory tract.

Is silica hydrophobic or hydrophilic?

hydrophilic
Processing. Initially, silica is hydrophilic due to the presence of the silanol (Si-OH) groups on the surface of the particle. These silanol groups can chemically react with various reagents to render the silica hydrophobic.

What are hydrophobic and hydrophilic surfaces?

Because the natural world is full of hydrophobic and hydrophilic surfaces, the basics of the phenomenon have been known by scientists for at least two centuries. For example, the lotus leaf is a well-known example of a hydrophobic material, protecting the water-dwelling plant from becoming waterlogged.

What is the difference between hydrophilic and hydrophobic colloid?

hydrophilicHaving the tendency to mix with water. hydrophobicHaving the tendency to not mix with water. colloidA stable system of two phases, one of which is dispersed in the other in the form of very small droplets or particles.

What is the difference between hydrophobia and hydrophobicity?

Hydrophobic molecules are molecules that do not dissolve in water. Therefore, these molecules repel water molecules. These hydrophobic molecules are called hydrophobes. The hydrophobicity describes how much hydrophobic a molecule is. Hydrophobic molecules are hydrophobic due to their non-polarity; in other words, hydrophobic molecules are nonpolar.

Why do Hydrophobic colloids need emulsifiers?

Hydrophobic colloids do not interact with water, so they are inherently unstable and generally do not form spontaneously. In order for the emulsion to stay stable, additional substances, or emulsifiers, are needed to stabilize the colloid.