How do you know when the Soundlogic XT is charged?
It’s blue when its charged and red when low. If you’ve used it 2 or 3 times, recharge it.
How do you know when your portable charger is fully charged?
Once it is fully charged, all the indicator lights will illuminate. Unplug the charger from the wall or your computer once all indicator lights are illuminated.
How do I get my portable charger to work?
Most power banks (aka portable chargers) charge via a USB port, simply connect your device to the USB port and begin charging. Some power banks come with a cable, or a variety of cables, that are detachable. This makes it easy to switch between cables for your iPad, your Samsung phone, or other device.
What does the red light mean on a portable charger?
If it’s blinking red it means that it’s low on battery and it should show plain red when it’s charging and will light up blue or green when it’s full. Try using a different cable that is also micro USB or replace the cable if you can.
How long does the Soundlogic XT take to charge?
1.6 hours
Answer: Generally speaking, the charging time depends on the charger you use, for a normal 2A charger, the time is calculated as: 2600 mAh / 2000 mA = 1.6 hours.
How do you charge a Soundlogic XT speaker?
Plug the Micro USB end of the included AUX/USB charging cable into the charging port of the speaker. Plug the other end into a USB port on your computer or USB power source with 1A output. 2.
Why is my portable charger blinking?
The CHARGE light may flash for the following reasons: The environmental temperature is too cold to charge the battery pack. The battery pack has not been used for a long time. There is a poor connection between the battery and charger.
How long does it take to charge a portable charger?
Portable chargers can be a lifesaver if you’re in need of a quick on the go charge. A small charger usually will take around 1 to 2 hours to charge. A large charger may take as long as 3 to 4 hours to charge, depending on its size.
Why is my portable charger not working?
Also, make sure that the power connector on the power bank is properly inserted in the socket. Try charging with a different power cable – If the connections are adequate and the power bank is still not charging then there is a possibility that the power cable is bad.
Does red light mean charging?
Red light means it needs to be charged. Blue light means its charged and can charge your devices.
How do you Bluetooth Soundlogic speakers?
You can turn on or off your speaker by holding the Power/pairing button for three seconds. When the Bluetooth indicator blinks, the speaker enters pairing mode. You should turn on your Bluetooth device and within 33 feet (10 meters) of your speaker to ensure that it works.