What are the dimensions of a Category 2 quick hitch?
LEE BOSS Quick Hitch Dimensions
| Lower Hitch Point Span (D) | Pin Centerline Lower To Upper (E) | |
|---|---|---|
| Cat 1 | 695.96mm | 406.4mm |
| Cat 2 | 32.62 in. | 14.78 in. |
| 828.55mm | 375.41mm | |
| Cat 3N | 32.62 in. | 18.78 in. |
How wide is a Category 2 hitch?
Three-point hitch specifications
| Category | Hitch pin size | |
|---|---|---|
| 1 | 19 mm (3/4″) | 22.4 mm (7/8″) |
| 2 | 25.5 mm (1″) | 28.7 mm (1 1/8″) |
| 3 | 31.75 mm (1 1/4″) | 37.4 mm (1 7/16″) |
| 4 | 45mm (1 3/4″) | 51 mm (2″) |
How wide is a quick hitch?
30-1/4 inch width
The overall dimensions measure 30-1/4 inch width x 23 inch height x 8-1/4 inches front to back. The lift arm spacing measures 27-1/4 inches with a ball bracket lift of 26 inches.
What size is Cat 2?
What are the 3-point hitch categories?
| Category | Tractor Power | Lift arm pin diameter |
|---|---|---|
| 1 | 20-45 HP | 7⁄8 in (22 mm) |
| 2 | 40-100 HP | 1 1⁄8 in (29 mm) |
| 3 | 80-225 HP | 1 7⁄16 in (37 mm) |
| 4 | More than 180 HP | 2 in (51 mm) |
How wide is a cat 2 3 point hitch?
| Category 2 | Category 4N | |
|---|---|---|
| Lower link hole diameter | 28.70 mm (1.13 in.) | 51.05 mm (2.01 in.) |
| Lower hitch point Span (1) | 825 mm (32.48 in.) | 920 mm (36.22 in.) |
| Width of ball (2) | 44.96 mm (1.77 in.) | 57.4 mm (2.26 in.) |
| Pin centerline – Lower to upper (3) | 610.11 mm (24.02 in.) | 685.04 mm (26.97 in.) |
What diameter is a cat 2 pin?
What are the 3-point hitch categories?
| Category | Tractor Power | Top link pin diameter |
|---|---|---|
| 0 | Up to 20 HP | 5⁄8 in (16 mm) |
| 1 | 20-45 HP | 3⁄4 in (19 mm) |
| 2 | 40-100 HP | 1 in (25 mm) |
| 3 | 80-225 HP | 1 1⁄4 in (32 mm) |
What is the difference between a Category 2 and 3 hitch?
Class 2 hitches are quite different from class 3 hitches. Class 2 hitches have a 1-1/4″ receiver and generally only go up to 3,500 lbs. GTW. On the other hand, class 3 hitches have a 2″ receiver and can range up to 8,000 lbs.
What is difference between Cat 1 and Cat 2?
Each category of three-point hitch is designed for a specific range of tractor horsepower, according to the website Antique Tractors. Category 1 is standard on tractors of 20-to-45 horsepower. Category 2 is used on tractors up to about 90 horsepower, and category 3 is generally used on tractors over 90 horsepower.
What’s the difference between a Category 1 and Category 2 3-point hitch?
Category 1 Hitch For tractors with 20 to 50 horsepower. Category 2 Hitch For tractors with 50 to 90 horsepower. Long days can seem even longer when you aren’t comfortable. Make sure you take a test drive with every tractor you’re considering.
What size is a cat 2 pin?
| Category 2 | Category 3N | |
|---|---|---|
| Upper link pin diameter | 25.4 mm (1.00 in.) | 31.75 mm (1.25 in.) |
| Upper link hole diameter | 25.65 mm (1.01 in.) | 32.00 mm (1.26 in.) |
| Lower link pin diameter | 27.94 mm (1.10 in.) | 36.58 mm (1.44 in.) |
| Lower link hole diameter | 28.70 mm (1.13 in.) | 37.34 mm (1.47 in.) |
What is the difference between a Category 1 and Category 2 3-point hitch?
What is the quick hitch?
The Quick Hitch is a faster method of attaching an implement to the tractor because it allows you to back up to the implement, lift it, and it’s ready to go. Every time!
How do you hook up a farm King quick hitch?
A Farm King Quick Hitch can make light work of hooking up implements to the 3-point hitch. Attach the Quick Hitch to your tractor’s 3-point hitch just like you’d hook up a piece of equipment. When the sway links are set you don’t have to adjust them again, and you can leave the Quick Hitch on your tractor all the time.
What are the ASAE 3-pt hitch standards?
These Quick Hitches are built to work with implements built to ASAE 3-pt hitch standards (Category I, Category II or Category III). The QH-101 (Category I) provides a special floating top link bracket that allows the operator to use this Quick Hitch with implements that will not accept a top link hook, due to the pin location being too low or high.
What is a cat cat quick hitch?
Cat. I II & III Quick Hitches FarmStar Quick Hitches are built for fast, reliable and easy connection (or disconnection) of 3-pt implements. These Quick Hitches are built to work with implements built to ASAE 3-pt hitch standards (Category I, Category II or Category III).