What does 6060 T6 mean?
6060 T6 is A medium strength aerospace aluminium alloy with, depending upon temper, Yield Strength of up to 35 ksi (240 MPa) and Tensile Strength of 42 ksi (290 MPa) ALLOY DESIGNATIONS.
How strong is 6060 aluminum?
Aluminium alloy 6060 is a medium strength heat treatable alloy with a strength slightly lower than 6005A. It has very good corrosion resistance and very good weldability plus good cold formability especially in temper T4. It is commonly used alloy for very complex cross sections and has very good anodizing response.
What is the difference between 6060 and 6061 aluminum?
6060 aluminum is a medium strength alloy more closely related to 6063 than to 6061 but will have more magnesium than 6063. This alloy is mainly found in Europe with metric sizes and is commonly heat treated to a temper with higher strength but low ductility. 6060 alloy is very good for anodizing.
What is 6060 Aluminium alloy used for?
Aluminium alloy 6060 is commonly used for architectural sections for windows, doors, curtain walls, interior fittings, lighting, furniture and office equipment, structural applications where surface finish is important.
What is the difference between 6060 and 6063 aluminum?
The main difference between 6060 and 6063 is that 6063 has a slightly higher magnesium content. It can be formed by extrusion, forging or rolling, but as a wrought alloy it is not used in casting. It cannot be work hardened, but is commonly heat treated to produce tempers with a higher strength but lower ductility.
What is ASTM B221?
ASTM B221-20 – Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes.
What is the difference between T5 and T6 aluminum?
T5 is generally air-cooled and naturally cooled during quenching in aluminum profile plants. T6 is cooled by water to cool the aluminum material instantaneously so that the aluminum profile can reach higher hardness requirements.
Is 6061 T6 the same as 6061 T651?
Both 6061-T6 aluminum and 6061-T651 aluminum are variants of the same material. They share alloy composition and many physical properties, but develop different mechanical properties as a result of different processing.
What does B221 mean?
ASTM B221 : Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes.
Is T6 aluminum strong?
The T6 refers to the temper or degree of hardness, which is achieved by precipitation hardening. This grade has a good strength-to-weight ratio and is also heat-treatable. With great formability and weldability, it is used for engineering and structural applications, boats, furniture, and more.
What does T6 stand for in aluminum?
What’s the difference between T6 and T651?
The difference between T6 and T651 of the 6061 aluminum plate is that the internal stress of T6 will be relatively large, it is easy to deform in processing. -T6511 is a subset of the -T6 temper with eliminated internal stress, so it’s more suitable for processing.
When and why to use aluminum 6061?
Type 6061 aluminum is one of the most widely used aluminum alloys. Its weld-ability and formability make it suitable for many general-purpose applications. Its high strength and corrosion resistance lend type 6061 alloy particularly useful in architectural, structural, and motor vehicle applications.
What are the differences between 6061 and 7075 aluminum?
Each of these attributes is discussed differently to draw a comparison between 6061 and 7075 aluminum. 7075 aluminum comes from the 7xxx series, while 6061 aluminum from the 6xxx series of aluminum alloys grade. With that in mind, it is notable that 6061 aluminum has a higher concentration of silicon, while 7075 aluminum has higher zinc content.
What does T6 mean in aluminum 6061T6 alloy?
The alpha-numeric suffixes attached to alloys, such as 6061-T6, represent the temper, or degree of hardness. They also represent the method by which the hardness was obtained. In the case of 6061-T6 aluminum alloy, the “T6” indicates that it was solution heat-treated and artificially aged. The suffixes may include additional numbers.
What does T6 in the designation 6061-T6 stand for?
In fact, T6 in the designation 6061-t6 stand for a temper. That is, after 6061 alloy undergoes solution heat treatment, it is artificially aged to obtain the strength and properties T6 state. Therefore, 6061-t6 aluminum shows excellent machinability, toughness, anodizing effect, etc.