How do you mount Elkay sink clips?
From the underside, place a clip in the center along each side and hand tighten to hold sink in place. Fasten the remaining clips along the edges and space them approximately 3” from each end, and equally along the font, back, and sides. For countertops thicker than 3/4“, clips can be spaced as close as 1-1/2”.
Are sink clips necessary?
In order to attach an undermount sink, you need to use kitchen sink clips underneath the sink. The clips keep the sink from moving. The clips also keep the sink from falling to the ground and shattering. The heavier the undermount sink, the more support it requires.
How do you remove kitchen sink clips?
To remove an undermount sink clip, back off the nut all the way and remove it as well as the clip. The post to which the clip was connected will remain attached to the underside of the countertop. If you need to remove the post, you can either unscrew it or cut it off with a hacksaw after the sink is out.
How do you secure a kitchen sink with clips?
Apply silicone caulk to the underside of the rim, drop in the sink and turn the clips 180 degrees to be underneath the countertop. Insert the screw into the clips, if they’re not there already, and tighten each screw with a screwdriver to hold the sink securely.
How do you install a top mount sink with clips?
A top-mount sink drops into a hole in the countertop and rests on its rim. The purpose of the clips is to keep the rim tightly sealed against the countertop surface. Here’s a typical installation procedure: Turn the sink over and note the groove on the underside of the rim.
Do you need sink clips for undermount sink?
Sinks come in three different styles, and most, but not all, of them require sink clips to hold them to the countertop. The clips are most crucial for undermount sinks because they’re the only things preventing the sink from falling.
How do you attach silicone caulk to a kitchen sink?
Insert and space them according to the manufacturer’s instructions and turn them toward the sink. Apply silicone caulk to the underside of the rim, drop in the sink and turn the clips 180 degrees to be underneath the countertop.
Does a farmhouse sink need a sink clip?
Because a farmhouse sink usually rests on supports built into the cabinet, it may or may not have sink clips. If it does, they may be more like the ones you’d use for a top-mount than the ones for an undermount.