Which way do I turn my offset disc?
As stated below, if you are using an offset disk, you should turn left.
What does an offset disc do?
The offset disc harrow is intended to work as a primary ground tillage farming implement — breaking virgin ground. Their chew produces a much smoother level to the ground.
Can you turn with an offset disc?
Depends on the disc. Some can take it and others really and truly cannot. If you have a drag offset disc like Mark further up was speaking of you have only one option turning left, otherwise you have to stop and backup.
How much horsepower does an offset disc need?
10 – 6 Series Offset Disc Ploughs The Ultimate Heavy Duty Plough
| Discs: | 32″ x10mm or Optional 36″ x 12mm |
|---|---|
| Gang Bolts: | Large gang bolts for heavy duty work |
| Disc Weight: | Approx 300kg per disc |
| Horse Power Requirements: | 18 – 23 HP per foot of cut |
What is the difference between a offset disc and a tandem disc?
I use the offset for breaking up older ground and chewing up cornstalks because it is much heavier. The tandem disk is mainly used for spring tillage on bean ground. The blades are closer together and it is lighter so it won’t chew up the corn stalks as much.
What is the difference between an offset disc and a tandem disc?
What is the difference between a disc and a disc harrow?
The Usage Difference: Disc plough is used to till the uncultivated land and disc harrow is used to till the disc plow turned land. If the ground has been turned with a dis plow, the disc harrow should be fine.
How much horsepower does it take to pull a 10 foot offset disc?
General rule of about 10 horse power per foot for offset. They pull a lot harder than a tandem plow. You could probably go a bit more but this will allow you to pull and plow with no problems.
How much horsepower does it take to pull a 10 foot disc?
A 30-40 hp would pull a 10 ft oneway in most conditions.
What is an offset harrow used for?
Used in open field working for the superficial ploughing, for the shattering of clods, preparation of soil for sowing, burial of organic substances & remains. It can be used in light and medium soil.
What is an offset disc harrow?
The FARMKING MOUNTED OFFSET DISC HARROW is used in open farm workings for the superficial ploughing, for the shattering of clods, preparation of soil for sowing, burial of organic substances & remains. To air the soil and to eliminate the weeds. For breaking the roots.
Why choose Farm King offset discs?
In order to get the most uniform and consistent field finish, Farm King offset discs have furrow filler blades as standard equipment. Furrow filler blades along with full sized blades on the gang assemblies create a uniform, well worked field or job-site.
How does a single offset disc depth control system work?
A heavy-duty rockshaft, in greaseable bearings, is the foundation of the single offset disc‘s depth control system. A single cylinder with positive depth control segments provides consistent and repeatable working depth. An adjustable crank allows the operator to regulate the balance of pressure on both front and rear gangs.
What is an adjustable crank on a farm King disc?
An adjustable crank allows the operator to regulate the balance of pressure on both front and rear gangs. Farm King discs feature fabricated steel half and full spools. Unlike cast iron spools, steel spools can withstand far greater “shock loads” from rocks or stumps thereby eliminating spool breakage.
What is the total length of all stops on a disc?
The total length of all stops is 8-1/4″, the depth stops must be installed to lock disc in raised position while the rest of disc is being assembled. NOTE:See ILL.