How do I find the remote code for my RCA TV?
RCA Universal Remote Codes:
- The TV codes are: 000, 006, 011, 019, 027, 034, 038 and 044.
- The VCR codes are: 000, 005, 007, 008, 028 035, 037, 054 and 069.
- The cable box codes are: 000 and 027.
How do I reprogram my RCA universal remote to my TV?
Turn on the TV you want to program your remote to. Aim your remote at the TV panel and press and hold the ‘TV’ button on your RCA universal remote. Once the light is turned on, at the same time, press and hold the ‘On/Off’ and ‘TV’ buttons until the light turns on again.
How do you manually program a RCA universal remote?
- Power on the equipment you want to pair.
- Press and hold the Code Search button on the universal remote control until the light turns on.
- While still holding the Code Search Button, press the button on the universal remote that matches the equipment you’re pairing (e.g. if it’s a DVR, press the button for DVR).
Where is the manufacturer code on a TV?
Read the user manual of both the remote and the device (TV, DVD, etc.) Search online for a list of codes related to your device. Search online for any list of codes that is not brand-specific (recommended if you have an unbranded TV). Contact the manufacturer of your device for the right code.
How to take care of the universal remote control rcr312wr?
Universal Remote Control Owner’s Manual RCR312WR / RCR311BR / RCR311BIR / RCR311SR / RCR311STR Manual del Propietario (parte posterior) Care and Maintenance † Keep the remote dry. If it gets wet, wipe it dry immediately. † Use and store the remote only in normal temperature environments. † Handle the remote gently and carefully. Don’t drop it.
How do I program my RCA remote without a code?
How to Program RCA Universal Remote Without Codes. “Switch On” the smart device like “TV” that you want the universal remote to operate. “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program. Point out the
How do I program a VCR remote to a satellite receiver?
Just press the corresponding key—VCR†DVD for a DVD player, TV for a television, SAT†CBL†DTC for a satellite receiver. Your universal remote requires two AA alkaline batteries (batteries may or may not be included, depending on model).
How do I install the batteries in my universal remote?
Your universal remote requires two AA alkaline batteries (batteries may or may not be included, depending on model). To install the batteries: 1. Remove the battery compartment cover. 2. Insert the batteries, matching the batteries to the (+) and (–) marks inside the battery compartment. 3. Push the battery cover back into place.