How do I hide the wires from my TV above my fireplace?
Hide your cables so they don’t clutter up your fireplace mantel. You can cut a small hole in the wall behind your television and run the cables behind the wall, or you can hide them behind surface mounted channels, which you can buy in a variety of colors to help camouflage the wiring.
How do you mount a TV without wires showing?
It’s really not that hard to mount your TV on a wall (and conceal all the cords)….From there, lift the TV up and hook it onto the mounting bracket.
- Recessed in-wall cable management system.
- A small level.
- Steel Fish Tape.
- Stud Finder.
- Tilt Wall Mount bracket for your tv.
- A flat-screen TV.
Is it OK to have TV above electric fireplace?
In short, yes. For most electric fireplaces, it is perfectly safe to use a TV wall mount to hang a TV above your fireplace. The only time this isn’t good for your TV is if the heat is blown directly upward. For most models, this isn’t a problem as the heat vents aren’t usually located on the top of the unit.
How can I hide my TV wires without cutting the wall?
How to Hide Your TV Wires Without Cutting Into Your Walls
- Use Cord Clips to Hide Your Wires Behind a TV Stand.
- Use Zip Ties to Keep Your Wires from Touching the Floor.
- Use a Cable Management Box.
- Use a Wall Cord Raceway Kit.
- Hide Your TV Wires Inside a Baseboard Raceway.
- Use a Fabric Cord Concealer.
Can I run wire behind fireplace?
we install plasma’s over gas fireplaces all day, everyday, simply because it is safe to run all wiring behind the drywall that is typically there. if you have any specific questions, you can send me a PM. By the way whatever you do, you should be sure to use CL2 or CL3 rated wire just for safty concerns.
Can I mount a TV above my fireplace?
The short answer is – yes. However, to ensure your television isn’t damaged from the heat, care must be taken to ensure heat generated by the fireplace is redirected away from television. There are several ways to do this, such as installing a proper mantel and building an alcove for the television.
How far should a TV be above an electric fireplace?
Recommended Space Between the TV and Electric Fireplace In general, for most fireplace models, we advise 8 inches from the top of the fireplace to the mantel, TV or ceiling and 6 inches from the bottom of the fireplace to the floor.
How do I protect my TV from electric fireplace?
The good news is that if you must keep your television above your fireplace, there are steps you can take to protect it.
- Install a Mantle or Projection Above Your Existing Fireplace.
- Close Your Fireplace Doors.
- Convert to a Gas Powered Fireplace.
- Use an Electric Fireplace.
- Consult a Professional Contractor.
How much does it cost to mount a TV and hide wires?
Cost to Mount TV and Hide Wires Mounting a TV and hiding the wires in the wall could run upwards of $1,000 or more. If you opt for cable covers that adhere to the wall, you won’t pay nearly as much. These kits run from $10 to $40 for materials only, not counting labor.
What to know before mounting your TV above a fireplace?
– Tape a thermometer to the wall in the approximate center of where your flat-screen TV might hang. – Then start the fireplace and let it run for several hours. – Check the thermometer.
Is mounting a TV above a fireplace a good idea?
Mounting a TV above a fireplace seems like the most logical spot check out our recommendations for TV picture settings to change, why it’s usually not a good idea to increase your television’s sharpness control, and the best time to buy a TV.
How to Mount TV above fireplace?
There’s a $100 surcharge for mounting a set on brick, stone, or plaster wall, or if you want the TV mounted above a fireplace. Target works with a company called HelloTech, and charges $100 to mount your TV, connect any necessary A/V devices or
How to hang TV above fireplace and hide wires?
– Then I added a 2×4 horizontally where I wanted to mount the TV and secured it into the studs. – Next, I added in some scrap 2×1’s and 2×4’s to create a base to screw a solid piece of masonite. – I drilled a hole right above the mantel and created a “channel” to feed the cord through. Our box for the TV is in the cabinet.