How do I install Corsair Hydro H100?
Let’s get started!
- Step 1: Mount the Backplate. First, adjust the notches on the backplate inward for LGA115X compatibility.
- Step 2: Attach Fans to Radiator.
- Step 3: Attach Radiator to Case.
- Step 4: Mount the Cooling Block.
- Step 5: Connect Fan and Pump Power Cables.
- Step 6: Connect Corsair Link Data Cable.
Where do you plug in a Corsair pump?
The H100i has an integrated 4-fan hub which is where you will want to plug in your H100i fans. You will find two ports on top of the cooling unit, where you can plug in the included fan power adapter cables.
Do you need thermal paste for Corsair H100?
As jim said, the h110i comes with pre-applied good quality pre applied thermal paste, but if you’ll want to change cpu’s or re-install the cooler you’ll need to wipe there thermal paste and apply a new layer to the cpu, be sure NOT to spread it! less is better, pea sized.
Is the H100X good?
The H100X is the newest iteration of an affordable 240mm AIO closed loop cooler without any extra bits such as RGB or expensive fans to drive the price higher. This package means we’ve got a great 240mm CPU cooler that does a great job at cooling, at a very reasonable price.
How do I install AMD mounting brackets?
1 AM4 mounting bracket (L) 2 AMD screw clips (D)…To mount your cooler using the AM4 socket:
- Remove the pre-installed Intel mounting bracket from the cooler.
- Install the AMD bracket by pushing both sides into the slot on the pump.
- Install the AMD screw clips into the bracket and secure them with the thumbscrews.
How do I connect my Corsair h150i to my motherboard?
Connect pump power cable to an available SATA power plug (figure 1). Connect pump tach cable to the CPU_FAN header on your motherboard (figure 1). Connect each fan to the shrouded 4 pin connectors on the pump (figure 2).
Where do you plug in a 3 pin AIO pump?
3-Pin Connector: The 3-Pin Connector should be plugged into your Motherboard’s CPU_FAN Header. It’s meant to control the Pump and Fan speeds on your entire AIO. It also makes sure the Motherboard does not show a CPU Fan Error when booting.
Where does the water pump connect to the motherboard?
Its recommended that the pump be connected to an alternative fan header on the motherboard such as System Fan 1, Chassis_Fan 1, or for newer motherboards a dedicated pump header.
Does the h100i come with thermal paste?
So, yes, it does come with thermal paste and there is not even a need for you to have to apply it.
What thermal paste does Corsair use?
CORSAIR TM30 thermal paste helps you push your PC to its limit, with a low-viscosity premium zinc oxide thermal material that’s easy to apply.