How do I pair my Corsair H80i v2?
Let’s get started!
- Step 1: Mount the Backplate.
- Step 2: Attach Inside Fan to Radiator.
- Step 3: Mount the Cooling Block.
- Step 4: Attach 2nd Fan and Radiator to Case.
- Step 5: Connect Fan and Pump Power Cables.
- Step 6: Connect Corsair Link Data Cable.
Where do you plug in a Corsair water cooler?
Connect the mini-USB side of the included data cable to the waterblock. Connect the USB header side to a free 9-pin USB 2.0 header on your motherboard. When in Windows, visit the download site here to download the Corsair Link dashboard software to control the cooler. Your new H100i GTX should now be fully operational!
How good is Corsair H80i?
I bought the H80i about 2 years ago from another store. Pros: It does what it does. It’s a great little AIO (All in one) water cooler that supports as much cooling as larger air based CPU coolers. Installation takes something to get used to if you haven’t done it before (This was my first water cooler).
Does the H80i v2 have RGB?
The Hydro Series H80i v2 is a high performance, all-in-one liquid CPU cooler that works with standard 120mm radiator mounts. The extra-thick 49mm x 120mm radiator and dual SP120L PWM fans provide the excellent heat dissipation you need for high performance CPUs….CORSAIR Hydro Series H80i v2.
Specifications | Print Specifications |
---|---|
Lighting RGB | yes |
What are AiO coolers?
“AiO” stands for “All in One”, which means that you’ll get a complete package, consisting of radiator, fan, pump, tubes and cooling unit, which reliably cools your CPU. All of it comes in a ready-to-use package on which you only have to attach the fans to.
Where do you plug in a liquid cooler?
FANS: The radiator fans should always be connected to CPU Fan 1 and CPU Fan 2 (or CPU Fan OPT) on the Motherboard.
Should I install my AIO before motherboard?
Can you install AIO before motherboard? From experience it would be easier to mount your AIO cooler before mounting your mobo in your case. Just make sure you mount your radiator and fans to your case before doing anything. You don’t want to try to mount them to your case while the cooler is attached to your mobo.
What is H80i v2?
The Hydro Series H80i v2 is a high performance, all-in-one liquid CPU cooler that works with standard 120mm radiator mounts. The extra-thick 49mm x 120mm radiator and dual SP120L PWM fans provide the excellent heat dissipation you need for high performance CPUs.
What is H80i v2 driver?
The Corsair H80i v2 driver runs on your operating system and enables it to communicate with the CPU cooler you use. If the driver hasn’t been properly installed on your computer, your Corsair cooler won’t fully function.
Do you need to refill AIO coolers?
On MAINGEAR PCs with “Closed Loop” liquid coolers there is zero maintenance required, and the system will never need refilling or flushing. These types of coolers are also called “AIO” or “All-In-One” liquid coolers and are recognizable as simple CPU coolers with a built-in pump and a single radiator.
Do AIO coolers need thermal paste?
Every CPU cooler needs thermal paste, but many have it pre-applied, which simplifies the installation process. To find out if you have pre-applied paste, check the bottom of the base plate or water block of your CPU cooler that attaches to the CPU.
How do I know if my Corsair water cooler is working?
The only way to accurately determine if your Liquid Cooling Pump is functioning, is by checking the Pump RPM. This will only be possible if the pump cable is connected directly to a fan header on the motherboard.