How do I print a Brother printer test?
How do I print a Test page?
- Turn off the printer.
- Make sure that the front cover is closed and the power cord is plugged in.
- Hold down Go as you turn on the power switch. Keep Go pressed down until the Back Cover, Toner, Drum and Paper LEDs light up. Release Go.
- Press Go again. The printer will print a test page.
Why won’t my Brother printer print a test page?
Difficulty printing from your PC can occur for various reasons. The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine is lost. This can occur as a result of wrong settings or configuration of the printer driver.
How do you run a nozzle check on a Brother printer?
Print the Print Quality Check Sheet and look at the nozzle check pattern….Press or to select the following:
- Select [General Setup]. Press OK.
- Select [Maintenance]. Press OK.
- Select [Impr. PrintQuality]. Press OK.
- Select [Impr. PrintQuality] again. Press OK.
How do you test a print DCP T510W?
DCP-T310/DCP-T510W/DCP-T710W/MFC-T810W
- Press Menu.
- Press or.
- Press Color Start.
- Check the quality of the four colour blocks on the sheet.
- The LCD asks about the print quality.
- The LCD asks you to check the print quality of each colour.
- Do one of the following:
- After the cleaning procedure is finished, press.
How do I check ink levels on my Brother printer?
1. Check the ink status from the control panel
- Press. (Ink) > Ink Volume. The Touchscreen displays the ink volume. You can also press. (Settings) > Maintenance > Ink Volume.
- Press. (Home).
Why does my Brother printer not print black?
This is due to several factors such as poor quality ink being used, tanks not being mixed often enough causing sediment to gather at the bottom of the tanks or not being used often enough. All of these factors can cause the black ink or the colours not to print.
How do you manually clean Brother printer heads?
Cleaning the print head.
- Do one of the following: – If your Brother machine has the INK key on its control panel, press the INK key.
- Press the UP OR DOWN ARROW key to select Cleaning.
- Press the OK key.
- Press the UP OR DOWN ARROW key to select BLACK, COLOR or ALL depending on what you want to clean.
- Press the OK key.
How do I test my brother DCP T310?
Press Detener/Salir (Stop/Exit) to finish the Print Quality check….Press or to select the following:
- Select [Maintenance]. Press OK.
- Select [ImproveQuality]. Press OK.
- Select [Check Quality]. Press OK.
How do I know if my Brother ink cartridge is empty?
FAQs & Troubleshooting
- Check the ink status from the control panel. Press. (Ink) > Ink Volume. The Touchscreen displays the ink volume.
- Check the ink status from the Status Monitor utility. *Windows users: Open the Status Monitor.
- Check the ink status from the ControlCenter. *Windows users: Open the ControlCenter.