How do I use Axis IP utility?

Change the IP address of a device

1. Start AXIS IP Utility.
2. Right-click the device in the list and select Assign new IP address to selected device.
3. Enter an available IP address and click Assign.
4. To access the device from a browser, double-click the name in the list.

How do I access my Axis Camera IP?

To access your site from a remote location open up AXIS Camera Companion 2.0 and log in with the same MyAxis account as used on the local site. Select the remote site, type in the site password and press Enter. You should now be connected to the site. your cameras and router up manually.

How do I discover my Axis camera?

Discovering Your Axis Camera With Your Room Alert Account To navigate to the camera’s Device Details page, select Devices in the navigation bar to the left in your Room Alert Account, and then select your camera from the device list. You may find the unit’s IP address listed under Local IP.

What is the default IP address of Axis camera?

192.168.0.90
The default IP address for the Axis cameras and video encoders is 192.168. 0.90.

What is IP utility?

IP Utility is a free, Windows-based application tool with friendly user interface. It helps you locate available devices including cameras, video encoders, and standalone NVRs in the network by showing its IP address.

How do I reset my axis camera remotely?

Remote reboot Axis IP camera

1. In Windows open the Command Prompt.
2. At the command prompt type in (without quotes) “FTP ”
3. You should be now asked to enter a username.
4. Once you are logged into the camera type in this command press enter and re-type the command again and press enter again.

How do I connect my axis camera to WIFI?

From the menu on the left, click the ‘Wireless’ link under the ‘Basic Configuration’ heading to enter the camera’s wireless settings page. Directly under the ‘Wireless Settings’ heading you will see the entry for the camera’s SSID. Input your SSID in this box and click ‘Save’ to apply the changes.

How do I reset my axis camera?

Axis Factory Reset

1. Disconnect the camera from the power supply and ethernet.
2. Remove the four screws securing the rear cover and remove it.
3. Keep the Control button pressed while you restore the power supply.
4. Hold down the button for about 15 seconds until the status LED is yellow flashing.
5. Release the Control Button.

How do I assign an IP address to my IP camera?

Configuring the IP address of the camera

1. Open a web browser like Internet Explorer then enter the camera’s IP address in the Address bar.
2. Enter your camera’s User name and Password then click OK.
3. Click the Setup tab.
4. Click Basic located at the left side of the page.
5. Select the Configuration Type.

Why won’t my IP camera connect?

Reboot the device. Rebooting your security camera will release its cache to flush, re-calibrate the settings, and revise connections. Directly unplug the security camera from its power supply then wait for a few seconds before plugging it again. This will reboot it.