How do I use my Bushnell telescope?
Aim the telescope at a bright object, such as the moon or a star. Look through the finder scope and adjust the height and direction of the telescope to center the object into the finder scope. Insert the low-power eyepiece into the telescope’s focuser. Look through the eyepiece.
Does Bushnell still make telescopes?
It is based in Overland Park, Kansas and is a subsidiary of Vista Outdoor. Bushnell’s produces binoculars, telescopes, spotting scopes, riflescopes, red dot sights, GPS devices, laser rangefinders, game cameras, night-vision devices and other optical equipments.
How do you use a Bushnell Barlow lens?
To use the Barlow, insert Barlow between the diagonal and the eyepiece. Secure by tightening small retaining screw. Insert eyepiece into open end of Barlow and secure. CAUTION!
How do you set up a Bushnell North Star telescope?
How To Use The Bushnell NorthStar Telescope
- Step 1: Setup Tripod And Accessory Tray.
- Step 2: Attach Telescope Tube.
- Step 3: Attach The Remaining Telescope Accessories.
- Start With The Low Power Eyepiece.
- Moving On To The Higher Power Eyepieces.
How do you clean a Bushnell telescope?
For basic cleaning:
- Use compressed gas or compressed air to blow off loose dust and large particles.
- Use a cleaning solution to gently lift off any remaining dirt or smudges.
- Use the solution to wet soft, plain tissue or cotton balls for larger optical surfaces or cotton swabs for small parts like eyepiece lenses.
Are Bushnell telescopes any good?
amazing telescope the best telescope for the money. if your new to this i would buy this telescope. its easy and very sturdy. the sky tours makes this very easy to start your journey to the stars.
Are National Geographic telescopes good?
4.0 out of 5 stars Powerful and easy to use. I’d given this as a gift to my niece – but assembled it and tried it out a few times before then. The laser aperture makes finding objects simple and the images were very clear – viewing Venus in the early AM hours was surprisingly clear.
Why can’t I see anything through my telescope?
If you are unable to find objects while using your telescope, you will need to make sure the finderscope is aligned with the telescope. The finderscope is the small scope attached near the rear of the telescope just above the eyepiece holder. This is best done when the scope is first set up.
What does a Barlow lens do on a telescope?
A Barlow lens is an optical tube containing lens elements that diverge the light passing through them. Named after English physicist and mathematician Peter Barlow, Barlow lenses add a second lot of magnification to each of your eyepieces while maintaining the existing eye relief.
How do I use my Bushnell Voyager?
Set the eyepiece into the diagonal mirror and place the diagonal mirror into the focusing draw tube on the end of the telescope. Use the levers on the equatorial mount to point the telescope anywhere you like. Use the finderscope to locate an object.