How do you change the 4 digit code on a Schlage Lock be369?

Press the Schlage button and then press 3. Wait for the lock to beep three times and flash orange light times. Enter your new Programming Code and wait for the usual 3 orange flashes and 3 beeps. Re-enter the new Programming Code to complete the change.

How do you reprogram a keypad lock?

How to change a code on a keypad door lock – 13 steps

1. #1: Make sure that the door is open and unlocked.
2. #2: Enter the programming code.
3. #3: Press the lock button.
4. #4: Press the “3” button.
5. #5: Press the lock button.
6. #6: Enter the access code you want to change.
7. #7: Press the lock button.
8. #8: Re-enter the programming code.

How do I reset my Schlage keypad lock without the code?

Press and hold the outside Schlage button. While holding the Schlage button, reconnect the batteries and release the button afterward. This will reset the lock.

How do I reset the code on my Schlage Lock?

Wait for the “Schlage” button to flash amber or orange and beep three times. The “Schlage” button will remain illuminated to indicate that the lock is ready for reprogramming. Press the “Schlage” button and the number “1” button simultaneously to add/change a new entry code.

How do I change my 4 digit Schlage Lock code without programming code?

How do I reset my Schlage door code?

​To change the six-digit programming code​ to one of your own choosing:

1. Enter the existing six-digit code.
2. Press the “Schlage” and then the “3” keys.
3. When three orange flashes and three beeps occur, enter a new six-digit code.
4. When three orange flashes and three beeps occur again, reenter the same new six-digit code.

How do you change the code on a lock?

How to Set a Combination Lock

1. Pull up the shackle to unlock.
2. Rotate the shackle 90 degrees counterclockwise and press down.
3. Hold down and continue to turn the counterclockwise another 90 degrees.
4. Set your own combination by turning the dials.
5. Turn the shackle back as normal then the setting is complete.

How do I find my Schlage Lock code?

You can find your Schlage Lock Programming Code on the front of the user manual—usually printed on a white label. If you don’t have the user manual, remove the lock from the door to find the Programming Code—printed on a white label on the back of the keypad assembly.

How do I use the turn lock feature on the be369?

• On the BE369 Deadbolt only. • The inside thumbturn may be rotated at any time to retract (unlock) or extend (lock) the bolt. entered. Schlage button has been pressed when Turn Lock feature is enabled. • On the FE599 Lever Lock only.

What is a thumbturn used for on the be369?

• Used to enter codes for programming and unlocking. • On the BE369 Deadbolt only. • The inside thumbturn may be rotated at any time to retract (unlock) or extend (lock) the bolt.

Where is the thumbturn on a be369 deadbolt?

• Located on the outside of the lock. • Used to enter codes for programming and unlocking. • On the BE369 Deadbolt only. • The inside thumbturn may be rotated at any time to retract (unlock) or extend (lock) the bolt.