How do you read a pressure washer nozzle?
In all cases the first two digits of the nozzle number indicate the spray angle (disperse) in degrees. EXAMPLE: 00 is 0 degree, 15 is 15 degree, 25 is 25 degree and 40 is 40 degree. The last two digits of the nozzle number indicate the orifice size, a standard industry designation.
What do the colors mean on pressure washer nozzles?
The color of the nozzle identifies the angle of the spray fan pattern measured in degrees and is generally the same across all sizes. Red is 0, Yellow 15, Green 25, and White 40. The black nozzle is used for applying soap at low pressure and is sometimes used for low pressure rinsing.
What is the green nozzle for pressure washer?
25 degrees
Green nozzles have a spray pattern of 25 degrees. They produce a moderately powerful spray and a flushing or sweeping effect. This attachment is perfect for power washing vehicles with fine finishes. White nozzles have a spray pattern of 40 degrees.
Why is water not going through my pressure washer?
Little Or No Water Pressure If not, chances are your inlet filter is clogged. Remove and clean it, and you should be good to go. Assuming water is flowing through the pump properly, start the engine, hook up the hose and wand and see if it works. If not, you have a collapsed or kinked hose or a clogged wand.
What do nozzle numbers mean?
Most companies identify their flat-fan nozzles with a four or five digit number (Figure 2). The first numbers are the spray angle and the other numbers signify the discharge rate at rated pressure. For example, an 8005 has an 80 degree spray angle and will apply 0.5 gallons per minute (GPM) at rated pressure of 40 psi.
How do you read a nozzle chart?
On a standard nozzle chart, the top column that runs left to right is the pressure that you want to obtain. The left column top to bottom is the nozzle orifice size designation. The top to bottom column next to the orifice size column indicates the actual orifice measurement.
What do the numbers on a spray nozzle mean?
What color pressure washer tip is strongest?
Red Spray Tip
Red Spray Tip (0-Degrees) The red spray tip creates a 0-degree spray pattern and is the most powerful nozzle of them all. You need to be very careful using this tip to make sure you don’t cause any damage to the surface you are cleaning.
What does nozzle size mean?
The orifice size of the nozzle determines the operating pressure of your machine. As a rule of thumb, the smaller the orifice, the greater the restriction of water flowing through the machine. This causes the pressure to increase. Choosing a nozzle with too large of an orifice will reduce operating pressure.
Why is my pressure washer low on pressure?
There could be small leaks, holes, or tears in your garden hose or high-pressure hose that are causing your pressure washer to lose pressure when you pull the trigger. If you find leaks, plug the holes or replace the hose, which should solve your pressure issues.
Why has my pressure washer lost pressure?
A Worn Nozzle Using an old, worn-out nozzle is a common cause of lost pressure, and also has one of the simplest fixes. All you need to do is replace the nozzle and make sure you’re using the proper size. Don’t go by the color of the nozzle, make sure you check the orifice size.
How do you read a sprayer nozzle?
How do I use the G-connect nozzle?
The Nozzle can be rotated between 0-15° to adjust the water from a powerful jet to a wide spray. With Gerni’s large range of accessories featuring the quick and easy G-Connect system, you can connect the required accessory with a simple twist or click. Suitable for use with all Gerni machines up to 2320psi.
How do I use G-connect accessories with my Gerni pressure washer?
The large range of compatible accessories makes it even easier to match any Gerni Pressure Washer with a G-Connect accessory. Simply twist or click to be ready to get the job done.
Does Gerni work with G-connect?
Gerni, The Original has a fresh new look. Find the perfect pairing partner for your Gerni with G-Connect. The large range of compatible accessories makes it even easier to match any Gerni Pressure Washer with a G-Connect accessory.