How do you reset the drum on a Brother HL 5340D?
7 Press and hold down the Go for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release Go. ! IMPORTANT Do not reset the drum counter when you only replace the toner cartridge.
What is the drum on a Brother laser printer?
What is the drum unit? The drum unit transfers the toner to the paper. The laser printer puts the toner on the roller called “The photosensitive drum” inside the drum unit, and then prints letters and images by fixing toner to the paper by heat and pressure.
What toner do I need for Brother HL L3270CDW?
Compatible toner for Brother HL-L3270CDW The Brother HL-L3270CDW uses Brother TN227 ink cartridges.
How do you reset the drum on a Brother HL 5240?
Brother HL-5240 – Reset Drum Simply open the front cover, and hold the “GO” button until all four LED’s are lit. Release the “GO” button and close the front cover.
How do I reset my brother hl 5350dn printer?
Reset the settings to factory default
- Power the machine off.
- Press down the GO button and power the machine on.
- Keep pressing GO until the all LEDs are on. The Status LED will be off.
- Release GO. All LEDs will be off.
- Press GO ten times. Your machine’s printer settings will be reset.
Do Brother printers come with drum?
Do I have to buy a separate drum unit? It depends on the brand of your laser printer. Most HP laser printers have the drum unit incorporated into the toner cartridge. But for Brother laser printers, the drum units come separately so you will need to replace these in addition to the toner cartridges.
How do I know if my printer drum needs replacing?
The drum unit may need replacing if you notice the printer producing blurry, low-quality images. Black or colored toner spots on printouts also indicates a failing drum unit. In some cases, horizontal lines may develop across the printout every time the paper passes the failing part of the drum.
Does Brother HL L3270CDW come with ink?
It comes with starter Black/Cyan/Yellow/Magenta toner cartridges (approx. 1,000 pages each).
Why won’t my Brother printer recognize the toner cartridge?
If you install a partially used toner cartridge, your Brother machine is unable to recognize toner consumption correctly which will cause this problem. Therefore, when you replace the toner cartridge, please use a brand new toner cartridge, not a partially used toner cartridge from another machine.
Why is the drum light on my printer?
The Drum LED flashes if the drum unit is near the end of its life. Use the drum unit until you have a print quality problem, then replace the drum unit with a new one. The Drum LED continues to flash if the drum counter was not reset when you installed a new drum unit.