How do you terminate a crossover cable?
- Step 1: Prepare the Cable.
- Step 2: Cut Cable Wires to the Appropriate Length.
- Step 3: Align Cable Wires for the Specific Configuration That Will Be Terminated.
- Step 4: Slide Cable Into the RJ-45 Connector.
- Step 5: Insert the RJ-45 Connector in the Crimping Tool and Crimp the RJ-45 Connector.
Which tool is used to terminate wire into termination blocks?
A punch down tool, also called a punchdown tool, IDC tool or a krone tool (named after the Krone LSA-PLUS connector), is a small hand tool used by telecommunication and network technicians.
How are wires to be terminated to a device?
A crimp termination is performed when the device requires a contact or terminal. The wire insulation is stripped, and the contact or terminal is attached to the wire using a crimp tool. The tool crimps the contact or terminal onto the wire conductor.
Does shielded CAT6 need to be grounded?
Any shielded cable must be properly grounded. That requires connectors and equipment that properly ground the shield, at least on both ends. Improperly-grounded, shielded cable will be a problem because the shield will exacerbate the problems it is meant to prevent.
What kind of cable is used to connect a computer to a network?
Ethernet cables
Ethernet cables connect computers in a Local Area Network, or LAN, within a small area such as a business, college campus or even your home. The wireless router common in many homes is connected to an Ethernet cable from the internet provider.
What is the purpose of a crossover cable?
Crossover cables These are used to connect two computers or similar devices directly together, such as computers or hubs. To create a crossover cable is to rearrange the wires on one end of a standard Ethernet cable, so that they are in the following order (starting at pin 1): 1.
What is the color code for crossover cable?
Green
Green – used for crossover ethernet connections. Yellow – used for POE connections. Orange – used for analog non-ethernet connections. Purple – used for digital non-ethernet connections.