Is the Bounty Hunter Tracker IV good?
It’s especially good for beginners. The device price is quite affordable and, at that, it can efficiently detect metals. For sure, this metal detector won’t be a top pick among experienced amateurs and professional treasure hunters due to its small set of characteristics and settings.
How deep can the Bounty Hunter Tracker IV detect?
Detects coin-size targets up to 6 inches deep; larger targets up to 2 feet. Detects the presence of all metals to include gold, silver, brass, aluminum, iron and steel.
What is disc and tone on a metal detector?
DISC will discriminate the metal type with different tones, such as long tone, short tone or without tone. But in TONE mode, unit will discriminate the metal type with high or low tones.
What do the numbers on a metal detector mean?
It’s essentially a numeric measurement, typically on a scale from 0 to100 that represents the conductivity of the target. It’s not fool proof, but in general, iron is the least conductive and gets a low number whereas aluminum and silver are very conductive and get very high numbers.
Can you use Bounty Hunter Tracker IV in water?
Yeah its safe to use it in FRESH water just double check to make sure there are no cracks in your coil.
Where are Bounty Hunter metal detector made?
Bounty Hunter metal detectors are owned by First Texas Products, so they are made in the US in Texas. Bounty Hunter makes metal detectors for all skill levels, from kids to beginners to intermediate and professional detectorists.
What is the disc setting on a metal detector?
The DISC LEVEL control is used to adjust the detector’s response to unwanted trash metal when operating in the Discrimination MODE. At the lowest setting (MIN), the detector will ignore most iron objects, but will still respond to light foil, bottle caps, pull tabs and most other metal objects,.
What is the notch setting on metal detector?
NOTCH: Provides an adjustable rejection “window” to eliminate undesirable metals from detection. Move the rejection “window” with the DISC/NOTCH knob.
What’s the best frequency for metal detecting?
The best frequency for metal detecting is somewhere in the range of 5 kHz to 15 kHz. This range is where most general-purpose metal detectors are tuned too, and also the easiest to manage for beginners.