What can wire cutters be used for?
Wire cutters are commonly used to cut copper, brass, iron, aluminum, and steel wire. Some wire cutters have insulated handles which ensure that you will not get shocked from the wires you’re working with. Diagonal cutters have intersecting jaws that cut the wire at an angle, leaving a flat tip.
What wire cutters do electricians use?
WGGE Multi-Tool Wire Stripper and Cutter This basic tool can cut, crimp, and strip. The serrated plier ends make it easy to grip and manipulate wire. It can be used for insulated and non-insulated wires.
What are the different types of wire cutters?
Different Types Of Best Wire Cutters Explained (With Pictures)
- Xuron Micro Shear Cutter.
- Whizzotech Diagonal Pliers (Side Cutter)
- End Cutting Pliers.
- Insulated Wire Cutters.
- Lineman’s Wire Cutters.
- Needle-Nose Wire Cutters.
- Ultra-Flush Side-Cutters.
- How NOT To Use Wire Cutters.
What is the purpose of diagonal wire cutters?
Diagonal cutting pliers are used for cutting wire and small pins in areas that cannot be reached by larger cutting tools. Because the cutting edges are diagonally offset about 15 degrees, these can cut objects flush with a surface.
What is the edge of a wire cutter used for?
Used to cut ligature wires (not to be used on ligatures more than 0.015 mm in diameter as it damages the cutting edge) Edges are sharp and can be sharpened when they become dull
What can you cut with diagonal wire cutters?
This range of no-compromise workbench essentials has everything you need from your next set of pliers. Our diagonal wire cutters can cut through a wide range of wire types and materials, including copper, aluminium, steel, brass and iron. The sharp jaws can cut through rivets, springs, nails, and bolts too. Nipping and slicing.
What is an orthodontic archwire cutter used for?
Use and features 1 Used to cut the distal portion of an orthodontic archwire 2 Can be used extra-orally (prior to placement) 3 Can be used intra-orally (after placement) 4 There is a ‘safety’ mechanism to hold the cut archwire so it does not fall into the patients mouth More
What are side cutters used for?
With side cutters (also known as “snips”), the cutting edges of the jaws intersect the joint rivet on an angle (hence the name “diagonal cutters”) and create an initial indentation, and then wedges the wire apart (in comparison to scissors that use a shearing action).