What cars have KA24E engine?

Which Cars Came With KA24E/DE Engines?

  • 1989 – 1990 Nissan 240SX.
  • 1990 – 1992: Nissan Stanza.
  • 1989 – 1995: Nissan Access / Nissan Prairie.
  • 1990 – 1995: Nissan Pathfinder.
  • 1993 – 1996: Nissan Terrano II.
  • 1989 – 1992: Nissan Pintara / Ford Corsair.
  • 1990 – 1997: Nissan Hardbody.

How much HP can a KA24E handle?

How Much Hp Can A Stock Ka24e Handle? It should be 210 horsepower.

What is the difference between KA24E and KA24DE?

KA24E is a single cam motor and KA24DE is a dual overhead cam. The KA24DE has more horsepower and torque. The KA24E has higher compression ratio. The tranmissions and alot of the accessories are the same.

Can you turbo a KA24E?

Turbocharging the KA24DE can produce great numbers if the tuning is right. It’s easy to attain over 200rwhp with a basic turbo kit like the kind sold on ebay. Advanced tuning and internal engine modification has produced KA24 240SX’s with 500+ horsepower.

How much boost can a stock KA24E take?

A safe goal is around 350 rwhp on a stock block with a good tune.

Can you put a KA24DE head on a KA24E block?

Registered. It can be done, but its not going to be just a simple head swap. Physically the head will bolt onto the block, but the timing cover won’t align, compression is way to high for pump gas on the stock tune, and piston to valve clearance will have to be worked out.

How much boost can a stock ka24e take?

How much horsepower does a KA24DE have?


Engine Code: KA24DE
Displacement: 2,389cc
Bore & Stroke: 89mm x 96mm
Peak Horsepower: 135.3 whp @ 5,100 RPM

Will a KA24DE transmission fit a KA24E?

Re: ka24e transmission on a ka24de Yes!

How can I make my ka24e faster?

Rebuild a new block with proper compression pistons, a cam ground for boost, and put a small turbo. Done deal, probably actually hit 200 reliably.

How much HP can a 240sx handle?

If you can get it to work with an S-10, and a V-8, then it will handle the power no problem. In japan, they have been making 600-700 hp on the rear end with no problem.

How can I boost my KA24E?

Re: boosting my KA24E Buy a sr20det fmic and piping kit off ebay (most of them fit the ka also) Get a megan racing down pipe, test pipe, and a 3 inch exhaust! Get a stock sr20det turbo (either a T25 or T28), Buy a peak boost or any turbo manifold really, and get a Good BOV, i reccomend getting an HKS SSQV!