What causes both tail lights not working?
The most likely cause for malfunctioning tail lights is a blown fuse, followed by a problem with the wiring or the control switch. Other causes include bad light bulbs, faulty bulb socket, or a bad light sensor. The taillights have separate controls, wiring, and sockets for each of the functionalities.
Why do my brake lights work but not my tail lights?
Tail lights are usually powered by the running lights circuit, which is always hot (powered) when the key is in the “on” position. The tail light fuse only has power when the headlight switch is turned on. That’s why your brake lights work but your tail lights don’t – because your headlight switch isn’t turned on!
What fuse controls the tail lights?
The tail light fuse may be located in either the fuse panel in the front passenger side of your vehicle or in the main fuse box under the hood. Once you’ve opened either the panel or the main fuse box, locate the tail light fuse. If you’re unsure which one it is, use the owner’s manual for guidance.
What do you do when your tail lights wont turn on?
Once the fuse that controls your tail lights is identified, it can be tested using a fuse tester, which will light up if the fuse is good. If it doesn’t light up, the fuse should be replaced with one of the same size and amperage. On certain fuses, you can visually see a break in the metal wire inside a bad fuse.
Can a bad headlight switch cause tail lights not to work?
#5 – Control Switch Failure Another cause for tail lights not turning on is the switch that controls them. The head light switch on the dash can fail as well, and should be checked of everything else has checked out good.
Do tail lights and brake lights use the same bulb?
On many vehicles, the tail lights and brake lights share the same bulb. One filament inside the bulb is for the tail light and the other filament is for the brake light. There are also some vehicles that have a separate bulb for each circuit.
Can a blown fuse make your tail lights not work?
The most common reason why your tail lights are not working but brake lights are is due to a bad or wrong type of light bulb installed. It can also be caused by a blown fuse, bad wirings, or corroded sockets or plugs. A faulty control light switch could also be to blame.