# What do Munters do?

## What do Munters do?

Munters provides industrial dehumidification solutions, tailored to your needs, for a wide range of applications and markets.

## How does a Munters dehumidifier work?

Munters desiccant dehumidification systems remove moisture from the air by using a desiccant, a material which easily attracts and holds water vapor. Desiccant dehumidifiers are especially well-suited for removing moisture from air at a low temperature and low humidity level.

How do you calculate moisture removal rate?

Multiply the room’s length, width and height. Next, calculate AHAM. To do so, take the room size in cubic feet and divide it by the appropriate number based upon dehumidifier type and class. Finally, divide the result by the dehumidifier’s rating to arrive at the number of dehumidifiers required.

### How is desiccant dehumidifier calculated?

2. Calculate the SCFM for one air change (volume / 60). 3. Calculate the dehumidification capacity required (SCFM x ACH)….You need to provide dehumidification capacity for three air changes per hour (ACH).

1. Volume = 100 x 50 x 50 = 250,000 cu.
2. SCFM = 250,000 / 60 = 4,167 SCFM.

### Is Munters a good company?

Munters is a great company. Management strives to provide work/life balance and a great working environment. Employee safety is a top priority. Employees are given opportunities to advance and grow as their desires and talents allow.

What is a Munter slang?

/ (ˈmʌntə) / noun. slang an unattractive person.

## Can you put dehumidifier in fridge?

Ways to Reduce Moisture in the Fridge One way to cut down on moisture would be to place a desiccant dehumidifier to absorb moisture inside of the refrigerator. The fridge dehumidifier contains minerals that absorb moisture and remove ethylene gas buildup from vegetables and fruits, as well as odors.

## What is the difference between desiccant and compressor dehumidifier?

Desiccant dehumidifiers tend to be smaller, lighter and can be quieter than compressor units. Whilst compressor dehumidifiers only work well in warmer temperatures (over 20°C), desiccant units extract the same amount of moisture in any temperature between 1-20°C.

How do you calculate dehumidification capacity?

To determine the number of dehumidifiers that are required, divide the number of pints required to dry the space and then divide by your dehumidifier capacity (if you do not the AHAM rating of your dehumidifier, check the manufacturers website). The result of this calculation represents the number of machines needed.

### How do I calculate dehumidifier size?

Dehumidifier capacity is rated by the amount of moisture removed in 24 hours, so a 30-pint humidifier is rated to remove 30 pints of moisture in one day. Use a 30-pint dehumidifier (or a unit between 24- and 39-pint capacity) in the following conditions: Damp rooms of 500-1,500 square feet.

### What size of dehumidifier do I need for my room?

Use a 50-pint dehumidifier (or a unit between 40- and 59-pint capacity) in the following conditions:

1. Damp rooms of 2,000-2,500 square feet.
2. Very damp rooms of 1,500-2,000 square feet.
3. Wet rooms of 1,000-1,500 square feet.
4. Extremely wet rooms of 1,000 square feet.

How do I choose a dehumidifier capacity?

Get a dehumidifier with a capacity of 10–26 US pints (4.7–12.3 L) for a moderately damp space.

1. For a space that’s 500 square feet (46 m2), a dehumidifier with a 10 US pt (4.7 L) capacity should work.
2. If your space is 1,000 square feet (93 m2), get a 14 US pt (6.6 L) dehumidifier.