In some occasions, you will have to write an essay in the extremely short amount of time on the exam in college or high school. Also, you may be a little bit of a procrastinator, and find yourself in a situation when the paper is due tomorrow morning, and you have not even chosen the topic yet. Even though a last-minute essay cannot look as great as a work prepared successively and carefully within the whole time given, you still have a chance to submit a decent paper. The working process will require your full attention and a lot of effort, even if you are assigned a simple essay. However, if you learn the next few tips, the essay writing will seem significantly easier and feasible even when you are short on time.

Firstly, clean up your working space to get started. Make sure you have everything you need on the table, take a pen, a few sticky notes, your laptop, and read through the assignment requirements. In case no prompt is given, search for good essay topics, and pick a few uncommon and interesting ones you will be able to write about. Making a final choice, think which topic is the most relevant to your current studies and will not take too much to research.

Afterwards, look for the most trustworthy sources or the ones you are certainly allowed to use. If you are not sure, access the online library or any free services where you can look for the books and articles for your essay. Use sticky notes to write down the information and put them in front of you to see how much data has been gathered and if you need to continue researching. Reread these notes from time to time and cross out the info you do not find relevant anymore.

When you have the data you need to produce a quality work, it is crucial to think about the structure of the future paper. If you are not sure how to write an essay outline properly, check what your essay type is first. Each type is organized differently, so you need to look up the structure every time you are given an essay homework. You can also search for an example of the essay on your topic, and adhere to its outline. No matter what kind of essay you are going to write, it is important to start with a thesis statement. It should declare what problem you will review in the paper, and which facts or arguments you will use to do it professionally. As these arguments will be discussed in the main part of the essay, outline the body paragraphs and put down a few sentences with the rough description of each paragraph. Think of the way you will engage the reader in the introduction, and which thought will be conclusive for the paper. When the direction of the work is clear from the outline, use it to draft the first version of the essay.

If you are not used to model essay writing, do not worry - your draft should not necessarily look like a masterpiece. It is only the depiction of your thoughts, and as you will have them written down, it will be easier to create a good essay. There is no best way to write an essay, so trust the working methods you usually use. You may like taking short breaks once in a few minutes, or write everything in one sit - just make sure to keep the focus on writing and avoid the urge to call a friend or watch something online. Thus, you will finish the paper faster, and will not feel guilty for engaging in other activities afterwards.

Do not forget to go through the essay a few times after the completion. Everyone makes typos and mistakes by accident, but it is about you to find and fix them before your teacher does. If you need help with an essay editing, try asking a friend or a family member to read and analyze your work. Also, you can order editing services in case your paper needs to be perfectly polished so that you can submit an ideal essay and get an excellent grade.

As these steps are simple to follow, you will not have any problems coping with an essay on time. Try the whole procedure at least once, and you will not have to use any other tips preparing an essay paper during your studies!

What is a CPU cooler made of?

A CPU cooler consists of its heatsink, heatpipes, and base. In addition there is the heatplate on the CPU and the thermal paste in between the CPU and the CPU cooler. A base (usually copper, but aluminum on lower cost units) connects directly to the heatplate on the top of a CPU.

Does socket matter for CPU cooler?

Currently, a lot of CPU coolers are compatible with most of the popular socket types although there are some only support one socket type. Beside the socket type, the layout of the motherboard can also determine which cooler’s will or won’t fit.

What is a CPU cooler heatsink?

A heatsink is a piece of metal that sits on top of a computer chip such as a CPU and draws power away from components by letting it rise through a set of fins. By themselves, heatsinks are passive; they have no moving parts.

Can you replace CPU heatsink?

Yes, you can replace the CPU cooler without removing the motherboard.

Why do CPU coolers use copper?

The vast majority of CPU coolers use the same basic principle of copper heat pipes and aluminium fins – copper absorbs heat very fast while aluminium gets rid of it more effectively. However, as the insane variety of coolers available shows, there’s much more to it than this. Consider heat pipes, for example.

Is copper heat pipes good?

Once the thermal conductivity is over a certain value, it does not provide much improvements in heat transfer. So, in terms of thermal conductivity both copper and aluminum are good for general applications.

Are CPU pins made out of gold?

A. Only gold plated. Pin diameter is 0.305 (+,-)0.025 mm.

Are heat sinks universal?

Fortunately, the vast majority of modern CPUs fall into one of three kinds: Intel LGA775: Unfortunately, Intel heat-sink/fan combos differ across generations. If you have a LGA775 socket CPU, it will require either an LGA775 compatible Intel heat-sink/fan combo, or a complicated “universal” after-market HSF.

Are all heat sinks made of either copper or aluminum?

Aluminum is the most common material for heat sinks. In particular, extruded aluminum heat sinks fit the needs of most projects. The metal is lightweight and has relatively good thermal conductivity.

What is the cleaning material of heat sink?

Dip a cotton swab in alcohol, and then use it to remove dirt and dust between the small metal fins of the heatsink. Clean the remaining surface of the heatsink with the lint-free cloth and alcohol.

Can new thermal paste go over old?

If you already have a working machine that needs thermal paste to be reapplied, you’ll first need to clean off the old thermal paste. Before beginning, ensure that the CPU cooler has been removed, and you can visually see the thermal paste; it is generally white or gray.

What is the best heat sink for a 478 processor?

This Intel C91249-002 heat sink and fan will keep your Socket 478 processor running at its optimal best! It features an aluminum heat sink with copper core and a 2.5-inch fan. Designed for use with all Intel Pentium 4 processors and Intel Celeron processors in the 478 pin package including 2.8E processors and 3.0 GHz up to 3.40 GHz!

What is Socket 478 c91249-002?

Intel Socket 478 C91249-002 Heat Sink and Fan. Aluminum heat sink / Copper core / 2.5-inch fan. Supports Socket 478 Intel Pentium 4 and Celeron processors 2.8E, 3 GHz to 3.40 GHz. 3-pin fan connector (approximately 11″ cord length from fan to 3-pin connector)

Is the Intel P4 heatsink retention motherboard bracket module any good?

I got this with the Intel P4 Socket478 Heatsink Retention Motherboard Bracket Module It was fairly easy to attach, and much more durable than the original dell heat sink. It also runs much cooler even after I upgraded the CPU to a 3.0GHz P4.

What kind of processor does the Intel Core i5 478 pin support?

It features an aluminum heat sink with copper core and a 2.5-inch fan. Designed for use with all Intel Pentium 4 processors and Intel Celeron processors in the 478 pin package including 2.8E processors and 3.0 GHz up to 3.40 GHz! Would you like to tell us about a lower price? Video Player is loading. This is a modal window.