What is an oscillating saw for surgery?

The oscillating micro-saw is a safe and pliable instrument for use during transverse osteotomy. It provides a precise approach for mobilization of lateral walls at the radix area, which may decrease the various unpredictable fractures related to bony pitfalls during aesthetic and functional rhinoplasty.

What kind of saw is used in hip replacement surgery?

The arthritic femoral head is cut off with a bone saw. The surgeon prepares the acetabulum for its acetabular cup prosthesis by using a special tool called a hemispheric reamer to grind down and shape the socket.

What is a medical saw?

Surgical oscillating saws are mainly used for joint surgery and are divided into knee joints and hip joints during joint surgery. In joint surgery, the proportion of knee joints is relatively large.

What kind of saw do they use for knee replacement?

Oscillating saws and rotary drills are the most common instruments used in orthopaedic surgery for the cutting of bone and the drilling of holes through the cortex in preparing surfaces for implants to be placed on the bone ends.

DO orthopedic surgeons use saws?

Most orthopaedic procedures involve using saw-blades for cutting bones either during arthroplasty or for performing osteotomy and re-alignment procedures. In the past, manual and gigli type of saws were used. This has now been replaced by the use of pneumatic and electric saws.

How does an autopsy saw work?

It’s Back! The Mopec 810 Autopsy Saw remains as the industry standard in anatomic & forensic pathology. High speed oscillating action quickly cuts through bone with minimal damage to soft tissue. Used for removing the cranial cap, making linear cuts or sectioning small bone specimens.

How far down the femur does a hip replacement go?

Once you’ve been anaesthetised, the surgeon makes a cut (incision) of up to 30cm over the side of your hip. The upper part of your thigh bone (femur) is removed and the natural socket for the head of your femur is hollowed out.

What is the latest in hip replacement?

The latest advanced technology, a percutaneously-assisted “SUPERPATH™” approach, involves sparing the surrounding muscles and tendons when performing total hip replacement surgery. This technique builds a traditional hip implant in-place without cutting any muscles or tendons.

What can cut through bone?

The meat cleaver is the best knife to use for cutting through bone. As a general rule of thumb, if the bone looks too big to chop, it probably is! If you are dealing with larger bones then you can always use a bone saw. But, for everyday use it’s the meat cleaver or butchers knife that will really make the difference.

What is a sagittal saw?

Introduction. A sagittal saw is the primary tool used by orthopedic surgeons for resection of bone. Generally, sagittal saws are used in confined spaces where the stroke length of the blade must be minimized to reduce inadvertent cutting of surrounding tissue and to permit precise control of the saw by the surgeon.

Are saws used in surgery?

In many applications, the saw is used in specialised jigs to provide accurate, measurable cuts, e.g. in knee surgery. Specialized saws such as the Gigli saw, a cable made of sharp strands of wire, are also used in some procedures.

What kind of saw do doctors use?

A Gigli saw is a flexible wire saw used by surgeons for bone cutting. A Gigli saw is used mainly for amputation, where the bones have to be smoothly cut at the level of amputation.