How do I fix error code 801?
Try this:
- Log out from “github.com” in your default browser if you are already.
- Go to VS Code and try to sign in with the extension.
- Press continue and then try to log in.
- Success page.
How do I clear the fault on my Canon printer?
Reset the Canon printer
- Switch on the printer.
- Press and hold the Stop/reset button.
- Press the button that you use to make a color copy and hold it down.
- Wait 5 seconds.
- The printer now reboots and sets itself up.
- Does the printer indicate that the device needs to be calibrated?
- You’ve reset your printer.
Why am I getting an error message on my Canon printer?
Why Is My Printer Showing Error? The most common cause when the printer shows printing error is because of the connection issue. Maybe your connection between the printer and the computer is lost. Check your USB cable and other wire, and if you are sure that all the wires are OK, then try to reconnect your printer.
How do I change the SMTP port on my Canon printer?
You need to get into the service mode on the copier….Press the Settings/Registration, quickly followed by 2 & 8 simultanously, then Settings/Registration again.
- Choose Mode list.
- Choose copier.
- Choose option.
- Choose Network.
- Press . It should change to
- Change the value on SMTPTXPN from 25 to 26.
How do I run a diagnostic on my Canon printer?
Select Start on the Windows task bar, and then select Devices and Printers. Right-click on the corresponding printer driver icon. Select Printer Properties from the pop-up menu or right-click the printer driver icon and select Properties from the pop-up menu. Select the Print Test Page button.
How do I setup my Canon printer to scan to email?
Sending Scanned Images via E-mail
- Start IJ Scan Utility.
- Click Settings…. The Settings dialog box appears.
- Click Photo Scan.
- Select Attach to e-mail in Application Settings, then select an e-mail client. Note.
- Click OK.
- Click Photo.
- Specify the recipient, enter the subject and message, then send e-mail.
What is SMTP RX and TX?
TX and RX are abbreviations for Transmit and Receive, respectively. Note that these metrics are referenced to the server being monitored; Transmit FROM this server, and Receive TO this server.
Why is my wireless printer not printing?
Troubleshoot Wireless Printer Problems Restart all your devices. Run the Printing Troubleshooter. Check Router settings. Update router firmware.
How can I tell if my Canon printer is wrong?
Open the Canon printer software in your system and choose the “Properties” or “Options” tab. Click on either “Test Alignment” or “Clean Print Heads,” depending on the version of the software. Wait for the printer to finish its alignment and then print a test page.