In some occasions, you will have to write an essay in the extremely short amount of time on the exam in college or high school. Also, you may be a little bit of a procrastinator, and find yourself in a situation when the paper is due tomorrow morning, and you have not even chosen the topic yet. Even though a last-minute essay cannot look as great as a work prepared successively and carefully within the whole time given, you still have a chance to submit a decent paper. The working process will require your full attention and a lot of effort, even if you are assigned a simple essay. However, if you learn the next few tips, the essay writing will seem significantly easier and feasible even when you are short on time.

Firstly, clean up your working space to get started. Make sure you have everything you need on the table, take a pen, a few sticky notes, your laptop, and read through the assignment requirements. In case no prompt is given, search for good essay topics, and pick a few uncommon and interesting ones you will be able to write about. Making a final choice, think which topic is the most relevant to your current studies and will not take too much to research.

Afterwards, look for the most trustworthy sources or the ones you are certainly allowed to use. If you are not sure, access the online library or any free services where you can look for the books and articles for your essay. Use sticky notes to write down the information and put them in front of you to see how much data has been gathered and if you need to continue researching. Reread these notes from time to time and cross out the info you do not find relevant anymore.

When you have the data you need to produce a quality work, it is crucial to think about the structure of the future paper. If you are not sure how to write an essay outline properly, check what your essay type is first. Each type is organized differently, so you need to look up the structure every time you are given an essay homework. You can also search for an example of the essay on your topic, and adhere to its outline. No matter what kind of essay you are going to write, it is important to start with a thesis statement. It should declare what problem you will review in the paper, and which facts or arguments you will use to do it professionally. As these arguments will be discussed in the main part of the essay, outline the body paragraphs and put down a few sentences with the rough description of each paragraph. Think of the way you will engage the reader in the introduction, and which thought will be conclusive for the paper. When the direction of the work is clear from the outline, use it to draft the first version of the essay.

If you are not used to model essay writing, do not worry - your draft should not necessarily look like a masterpiece. It is only the depiction of your thoughts, and as you will have them written down, it will be easier to create a good essay. There is no best way to write an essay, so trust the working methods you usually use. You may like taking short breaks once in a few minutes, or write everything in one sit - just make sure to keep the focus on writing and avoid the urge to call a friend or watch something online. Thus, you will finish the paper faster, and will not feel guilty for engaging in other activities afterwards.

Do not forget to go through the essay a few times after the completion. Everyone makes typos and mistakes by accident, but it is about you to find and fix them before your teacher does. If you need help with an essay editing, try asking a friend or a family member to read and analyze your work. Also, you can order editing services in case your paper needs to be perfectly polished so that you can submit an ideal essay and get an excellent grade.

As these steps are simple to follow, you will not have any problems coping with an essay on time. Try the whole procedure at least once, and you will not have to use any other tips preparing an essay paper during your studies!

How do I mount a USB drive to Hyper-V virtual machine?

Adding the USB Drive to the Virtual Machine

  1. Switch to your Hyper-V Virtual Machine Connection (VMConnect) window.
  2. On the VM settings window, click SCSI Controller —> Hard Drive —> Add.
  3. On the Hard Drive page, under the Media section, select the Physical hard disk option.

Does Hyper-V allow USB passthrough?

Hyper-V USB passthrough functionality allows you to access the USB device from within a virtual machine. There is a way to enable USB passthrough on Hyper-V for a memory stick, but you’ll have to use Windows storage subsystem.

How do I access local drive in Hyper-V?

Choose a local resource

  1. Open VMConnect.
  2. Select the virtual machine that you want to connect to.
  3. Click Show options.
  4. Select Local resources.
  5. Click More.
  6. Select the drive that you want to use on the virtual machine and click Ok.
  7. Select Save my settings for future connections to this virtual machine.
  8. Click Connect.

How do I Remote Desktop to Hyper-V virtual machine?


  1. Add an External Switch (Bridged Mode) to the Hyper-V Manager on Machine A.
  2. Change the network settings in the Guest to External and restart the Guest and make a note of the IP address.
  3. Add RDP Protocol (xrdp) to the Guest if necessary.
  4. Log out of the guest machine (but do not shut it down).
  5. From Machine B.

How do I get my virtual machine to recognize my USB?

Open up VirtualBox, right-click on the virtual machine that needs access to USB, and click Settings. In the VM settings window, click USB. You should see that USB is now available.

Does Hyper-V support USB devices?

We have a software installed on one of our Hyper-V guest machines running Windows 2022 Datacenter edition. This software requires a hardware lock which is a USB device. The device is inserted into the USB port of the server, and the host machine sees it as an Input Device.

How do I access a USB drive on a virtual machine?

Process to connect USB hard drive to Windows Virtual Machine:

  1. Plug the external USB hard drive into the USB port of your physical machine.
  2. Launch VMware Workstation.
  3. Start your virtual machine.
  4. Click VM > Removable device > external_hard_drive_name, then click Connect.

Can virtual machines access hard drive?

VirtualBox Raw Hard Disk Access This method is called VirtualBox “raw hard disk access.” This allows you to mount or boot a secondary hard drive or external USB, for example. We’ll show how to do this when running VirtualBox on a Windows, Linux or Mac OS X host machine.

What is the purpose of a virtual switch?

A virtual switch connects virtual machines (VMs) with both virtual and physical networks. This allows virtual machines to exchange data traffic between one another as well as with the organization’s intranet and the internet.

How do I use a flash drive on a virtual machine?

How do I fix failed to attach USB device to virtual machine?

To verify, do the following:

  1. Open the VirtualBox on your computer.
  2. Right-click on the virtual machine and select the Settings option.
  3. Switch to the USB tab.
  4. Tick the Enable USB Controller checkbox.
  5. Click the plus icon on the right side.
  6. Select the USB device that was not being detected.
  7. Click the OK button.

What is Hyper-V virtual switch?

Hyper-V Virtual Switch includes programmatically managed and extensible capabilities to connect VMs to both virtual networks and the physical network. In addition, Hyper-V Virtual Switch provides policy enforcement for security, isolation, and service levels.

How does the Hyper-V Vm access the USB device?

In turn, the Hyper-V VM should have access to the USB device as if the device is directly connected to the VM. This USB passthrough access method is appropriate if: The Hyper-V VM guest OS is either Windows or Linux. You only require access to non-removable USB mass storage devices.

Why can’t Hyper-V virtualize USB drives?

As a result, we face special difficulties with USB in virtualized environments. Hyper-V can set up most USB disk drives in passthrough mode, but it does so via Windows’ storage subsystem. As I said in the opening paragraph, only one component can communicate with a USB device, so the Windows disk subsystem brokers I/O for all USB storage devices.

How do I enable USB Redirection in Hyper-V?

Right-click on the host in the left pane. Click Hyper-V Settings. In the left-side tabs, click Enhanced Session Mode Policy. Check the box for Allow enhanced session mode and click OK . It is not necessary to enable the Guest services integration service just to enable USB redirection.