How do I print labels on my Zebra printer?
Configuring the Zebra Label Printer
- Log into the Point of Sale as an owner or manager.
- At the bottom of the Dashboard, choose Settings:
- Choose Printers and select Label Print Options:
- Select the type of label you want to print out: Pricing Label: Displays the name and price in large font with a small barcode.
How do you change the label size on a Zebra GK420t?
- Click on the Windows start button.
- Click [Devices and Printers].
- Right click on your Zebra printer and click [Printer properties].
- Click [Preferences…].
- Under Size, change the label size to match with your thermal labels. You can change the unit in Paper Format, if required. Click [OK] once completed.
Why is my Zebra printer not printing labels?
Zebra printer not working issues usually occur due to temporary glitches or incorrect printer configuration. To resolve the issue, perform a power cycle, cancel the pending job or set the printer as default. If that does not work, check for driver issues or try to reset the device to factory default as a last resort.
How do I print labels from my printer?
How to Print Labels
- Choose the right label paper. While many kinds of paper can be used in a printer, picking a paper specifically for the labels you want to print works best.
- Inspect the label paper.
- Design the label.
- Test the label.
- Load the label paper.
- Set print settings.
- Print.
How do I print larger labels?
Go to Settings > Printing > Printing Setup and check your label’s Document Options.
- For thermal label printers (Zebra, DYMO, etc), the label format should be set to one of the 4″ x 6″ options.
- For standard desktop printers (laser, inkjet, etc), the label format should be set to one of the 8.5″ x 11″ options.
Why is my label not printing?
This issue can occur for a few reasons. The printer may be loaded with an unsupported label size or type, the printer’s sensor may be dirty, or there may be a problem with the DYMO drivers. Make sure you are using a supported label size.
How do I test my printer for labels?
To perform a self-test for the DYMO 4XL printer :
- With a roll of labels in the Dymo 4XL printer, press and hold the form-feed button on the front of the printer for five to ten seconds.
- Once the self-test begins, release the form-feed button.
- To stop the self-test, press and release the form-feed button.