How do I reset my PetSafe cat flap?
To power down and then reset the door:
- Unplug the power.
- Take out the battery.
- Press and hold the red button for 10-15 seconds. This will clear the circuit board.
- Plug the unit back in.
- Press and hold the green button for 30 seconds to restore the door to default settings.
- Put the battery back in.
How do you reset a SureFlap cat flap?
Answer
- Remove the battery cover lid.
- Press and hold the memory button for at least 10 seconds.
- The indicator lamp will stay on for the duration that the button is held down.
- When the memory is wiped, the catch will open and close automatically.
- Let go of the memory button and replace the battery cover lid.
How do you reset a cat Mate cat flap?
Factory Reset To erase all programmed I.D. Discs / microchips, press and hold the ‘PROGRAM’ button for 30 seconds until LED flashes. After a further 30 seconds you may re-programme I.D.
How do you activate the microchip cat flap?
1) Insert batteries and leave for 10s with nothing in the tunnel so the sensors can settle. 2) Press the ‘memory’ button and persuade your cat to put their head up to the door from the tunnel side. The indicator light will stop flashing when their chip has been learnt. 3) Leave the flap until the lock closes again.
Why is my petsafe cat flap not working?
You should first check if the microchip cat flap’s batteries are aligned correctly. Look at the polarities of the connections. Ensure that your batteries are aligned according to the indicated polarities.
Why is the red light flashing on my cat flap?
How to tell if the batteries need replacing on the SureFlap Microchip Cat Flap. If the LED light starts flashing red every five seconds, this is an indicator that you need to replace the batteries.
Which way round does a cat flap go?
The cat flap should always open to the outside, with the lock located on the inside.
How do I know if my SureFlap is working?
The red light should stop flashing and the grey catch should pop back up again. Please note: A faint ticking noise (1-2 ticks) should be heard after the catch drops down and again after the catch pops back up. Replace the battery cover lid.
Why has my cat flap stopped working?
One of the most common microchip cat flap problems is that the flap stops working or it won’t open. Your microchip cat flap may not work due to several reasons. It may fail to work when your pet uses it or it may not record the collar tag or microchip number.
Why is my cat flap flashing red?
Can I bring my cat inside with the cat flap on?
You can bring your cat inside. To remove the cat flap from the test mode, unplug the door and remove the battery if being used. Press the red button for 1 second, then plug the power back into the cat flap. Stray cats are getting in even though my Petporte smart flap® is working.
What size chip is not compatible with the cat flap?
Please note that chips with 10 digits, lettered characters, and those starting with 977xxxxxxxxxxxx and 98514xxxxxxxxxx are not currently compatible with the cat flap. How do I choose the right size pet door?
How do I remove the cat flap from the test mode?
To remove the cat flap from the test mode, unplug the door and remove the battery if being used. Press the red button for 1 second, then plug the power back into the cat flap. Stray cats are getting in even though my Petporte smart flap® is working.
Will the microchip petporte smart flap scan my cat?
The Microchip Petporte smart flap will not scan my cat. Make sure your cat’s chip is compatible with the Petporte. Use chip checker tool. If your cat has a Bio Therm (temperature reading) chip, this is not compatible. These chips can sometimes stop working. Some examples of Bio Therm numbers include 985 140 000123456 and 985 141 000123456.