How do I reset the maintenance required light on my Toyota Tacoma?
Answer provided by
- Start with your car off.
- Press and hold the odometer reset button. It is located on your dashboard.
- With the reset button still depressed, turn your car on and off again.
- When you’ve turned your car off again, release the reset button. When you turn your car on again, the light should be gone.
How do you reset the maintenance light on a 2015 Toyota Tacoma?
How To Reset Maint Reqd Oil Light On Toyota Tacoma
- Put the key to the ON position but don’t start the car.
- Make sure your screen shows TRIP A.
- Turn the key off.
- Press and hold the ODO/TRIP button while turn on the ignition again.
- Keep holding the ODO/ TRIP button.
How do you reset the maintenance light on a 2020 Toyota Tacoma?
Reset the maintenance light of the 2020 Toyota Tacoma by turning ‘on’ the key position and turning the key back off. Afterward, push and hold the reset button, while turning the key back to the ‘on’ position. Continue holding the reset button until all of the zeros clear and the odometer reading returns.
How do you reset the maintenance light on a 2013 Toyota Tacoma?
On your 2013 toyota tacoma, to reset the maintenance light, first put your key in and turn it to the “on” position. Go to the odometer and press the odometer to the “trip a” position, then turn the key “off”. Turn the key “on” and hold the odometer button until it flashes all zeros. Maintenance light will turn off.
How do you reset the maintenance required light on a Toyota Tacoma 2021?
2018-2021 Models
- Press the “Power” button once without holding the brake to activate the electronics.
- Use the Left and Right arrows to select the “Gear”
- Use the Up and Down arrows to select “Settings“, then press .
- Use the arrows to select “Maintenance Reset“, then press .
- Select “Yes“, then press .
How do you reset the maintenance light on a 2018 Toyota Tacoma?
With Steering Button
- Turn the car on but not start the engine. Leave your foot off the brake and then press the START button twice until you get to the accessory mode.
- Go to the ⚙️ GEAR.
- Find and select the SETTINGS.
- Select MAINTENANCE RESET.
- Select YES.
How do you reset the maintenance light on a Toyota Tacoma 3rd generation?
Light Reset Instructions: Press and hold the trip meter reset nob (next to your Toyota Tacoma’s odometer). While holding the trip meter reset nob, turn the ignition to ‘ON’, but do not start your Toyota Tacoma. Hold the meter reset until the MAINT REQD light switches off.
How long does it take to reset maintenance required on Tacoma?
Time needed: 3 minutes. After an oil change, you should reset your maintenance required light on your Toyota Tacoma. We have a 2008 Tacoma here, so let me show you how that is done. If your vehicle has an ignition button, press the START/STOP button two times without step on the brake pedal
How to reset oil maintenance required light on Toyota Tacoma?
Follow the instructions below to reset the Oil Maintenance Required Light on your Toyota Tacoma: Turn the ignition key to the “ON” position without starting the engine If your vehicle has an ignition button, press the… Press the ODOMETER/TRIP button repeatedly until you see “TRIP A” The button is
How do I check the odometer on a 2008 Tacoma?
We have a 2008 Tacoma here, so let me show you how that is done. If your vehicle has an ignition button, press the START/STOP button two times without step on the brake pedal Then you going to press the ODO/TRIP button here for the odometer until it displays TRIP A
How do I reset the maintenance light on my Toyota Corolla?
Press And Hold ODO/TRIP BUTTON And Turn Ignition To The “RUN” Position. Hold Knob For At Least 5 Seconds Until “MAINT REQD” flashes multiple times and the light goes off. Turn The Ignition OFF. Maintenance Reset Is Complete.