How do you bypass the anti-theft system on a Pontiac Sunfire?
Press and hold the “Valet/Override” button located under the dash. Hold the button until the blinking LED light on your dash is solid. Switch your “Valet” button to “Off” if you have a button labeled “On/Off.” Your alarm should now be reset. If you wish to enable the alarm, repeat these steps to turn the alarm back on.
How do I get my Pontiac out of theft mode?
Turn the ignition to the “ON” position but do not start the engine. Wait 30 seconds and start the engine. Verify that none of the security lights on the dashboard are flashing or illuminated. The theft system has been reset.
How do I get my car out of anti-theft mode?
Look for a button that allows you to slide the physical key out of the fob. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in this position. This will signal to your car’s system that you have the right key, and will enable you to bypass your car’s alarm system.
How do I reset my anti-theft immobilizer?
Key
- Insert the key into the driver’s side door lock.
- Turn the key once, but not all the way to unlock the door. Leave the key in this position for 40-60 seconds.
- Do this again, but turn the key in the opposite direction.
- Remove the key from the door, get into your Ford, and start the engine. The system should be reset.
How do I know if my car is in anti theft mode?
If the security or anti-theft light is flashing when you attempt to start your car, and the engine does not crank or does not start, you have an anti-theft problem. The system may not be recognizing your key or keyless entry signal, or there may be a fault in the anti-theft module, keyless entry system or wiring.
How do I turn off anti theft without key fob?
Ways to stop a car alarm without a keyfob
- Check your owner’s manual. Every vehicle is different.
- Lock your doors.
- Turn the car on.
- Turn the ignition to on and wait.
- Pull the fuse for the alarm.
- Pull the wires for your alarm.
- Disconnect the battery.
How do I permanently disable anti-theft system?
One way of resetting the anti-theft deterrent is by unlocking the doors using the keyless entry system. Again, the car owners or the drivers should leave the car doors open moving out of the car so that they can be able to lock the doors from outside by pressing the lock switch.
Is there a fuse for the anti-theft system?
You can find the alarm fuse in the panel. Look in the owner’s manual to find the exact location of the fuse used by the security system. While the fuse is out, the car is not going to start. However, you can reinsert it and hopefully reset the alarm.
Where is the fuse for the anti-theft system?
It is usually located on the dashboard by the driver’s door, in front of your left knee. You may find the alarm fuse in this fuse box. If you do not find an alarm fuse inside of the car, look in the fuse box under the hood on the driver’s side. Your car model may or may not have additional fuse boxes.
Where is the alarm fuse located?
Locate the fuse box containing the alarm fuse. It is usually located on the dashboard by the driver’s door, in front of your left knee. You may find the alarm fuse in this fuse box.
How do you know if your car is in anti-theft mode?
Does the anti-theft system have a fuse?