How do you drain a Jacuzzi j300?
reverse order to close the drain prior to refilling the spa….Turn off power to spa at breaker.
- Locate the drain valve on the front/lower.
- plastic pan.
- Gently rotate the larger (rear) valve body 1/3.
- turn counterclockwise to unlock the drain.
Where is the drain on a Jacuzzi hot tub?
Your hot tub comes equipped with a drain spigot, which is located on the outside of the tub, near the bottom rim. (Some models have two spigots, a primary and an auxiliary.
How do you drain a Jacuzzi tub?
To let the water out, you can drain the tub through the valve on the bottom of your spa. If your spa isn’t hooked up to a drainpipe, you can use a hose to drain the water. You can also use a submersible pump to speed up the process. Once drained, wipe your spa down and apply a non-foaming cleaner to the entire tub.
How do you drain a Jacuzzi whirlpool?
Whirlpool bathtubs require a plug to seal the drain. Locate the drain on the bottom of your Whirlpool bathtub. The drain is located on the same side as the faucet. Insert the plug into the drain and then turn the plug clockwise until it stops turning.
How do you get water out of the bottom of a hot tub?
How to Drain a Hot Tub with a Submersible Pump
- Follow the Pipe Flush process prior to draining.
- Turn the power to the spa off at the circuit breaker.
- Place your submersible pump in the hot tub footwell or deepest point.
- Run the hose to your drain.
- Turn the pump on and let the spa drain.
How do you drain a hot tub without a pump?
Hot tubs need to be drained every few months….How to Drain a Hot Tub With a Hose
- Place the end of a garden hose in the hot tub, dropping it straight down into the water so that it lies on the bottom.
- Turn off the hose, disconnect it from the faucet, and keep it low to the ground.
How do you drain a hot tub fast?
Drop one end of a long vacuum hose into the spa, and connect the other end to the wet/dry vacuum. Turn it on for a few seconds – just long enough to let the hose prime and get the flow moving. Turn off the vacuum, and quickly disconnect the hose so the water can flow out onto the ground.
How do you completely empty a hot tub?
Place your submersible pump in the hot tub footwell or deepest point. Run the hose to your drain. Turn the pump on and let the spa drain. When the hot tub is empty, turn off the pump, remove it from the spa, detach the hose, and return it to storage.