How much power does a Cisco 2911 use?
210 W
Specifications
| Colour of product | Black |
|---|---|
| Power consumption (typical) | 210 W |
| Power source type | AC |
| AC input voltage | 100 – 240 V |
| AC input frequency | 47 – 63 Hz |
What is throughput of Cisco 2921 router?
Four integrated EHWIC slots on the Cisco 2901, 2911, 2921, and 2951 allow for more flexible configurations. Each HWIC slot offers high-data-throughput capability: ◦ Up to 1.6 Gbps aggregate toward the route processor. ◦ Up to 2 Gbps aggregate to other module slots over the MGF.
What is the throughput of a Cisco 4331 router?
Boasting an aggregate data throughput of up to 100 Mb/s that’s upgradeable to up to 300 Mb/s, the ISR 4331 router is equipped with a total of three WAN/LAN ports, including one Gigabit Ethernet RJ45/SFP port, a Gigabit Ethernet RJ45 port, and a Gigabit SFP port, along with a mini-USB port, a USB 2.0 Type-A port, two …
What is 2911 router?
Cisco 2911 Integrated Services Router Integrated Services Router offers embedded hardware encryption acceleration, voice- and video-capable digital signal processor (DSP) slots, optional firewall, intrusion prevention, call processing, voicemail, and application services.
How do I check the fan speed on my Cisco router?
Execute one of the following commands to check the status of fans on Cisco equipment. Use the ‘show environment | include fan-tray’ command to check Fan-Tray status. Or use ‘show environment status fan-tray’ command. You can also check temperature using ‘show environment temperature’ command.
What is aggregate throughput in router?
It’s the maximum bandwidth that can pass through the router.
How many Gigabit Ethernet ports are available on the 2901 router in the Cisco Packet Tracer?
Cisco 2901 ISR router The Cisco 2901 Integrated Services Router (ISR) has been designed to delivers data, voice, video, and application services for branch offices. It includes 2 integrated 10/100/1000 Ethernet ports and 4 enhanced high-speed WAN interface card slots.
What is Cisco ISR?
ISR stands for Integrated Service Router. The term “integrated services” describes a type of network architecture used to guarantee network Quality of Service (QoS). ISR series routers have edge networking capabilities and provide reliable, secure branch office connectivity.
What is K9 in router?
K9 is both an ordering code as well as a designator in an image filename to indicate that the unit has the strong encryption license included. On a ASA, that means the 3DES-AES license. If an ASA was originaly procured without the k9 code, the license can be added later (it’s free).
Is 2911 Part 4 load test piles?
According to IS: 2911 a 1974 (Parta4), the allowable load may be taken as one of the following whichever is less. 50 % of the load at which the total settlement is 10 % of the diameter of the pile. Two—thirds of the final load at which total settlement is 12 mm.
How do I see Cisco fan status?
What are the key features of Cisco 2951 router?
The Cisco 2951 Integrated Services Router (ISR) delivers highly secure data, voice, video, and application services for small offices. Key features include: 3 integrated 10/100/1000 Ethernet ports with 1 port capable of RJ-45 or SFP connectivity. 2 service module slots. 4 Enhanced High-Speed WAN Interface Card slots.
What is the difference between Cisco 2911 and 2921?
Cisco 2911 with 3 onboard GE, 4 EHWIC slots, 2 DSP slots, 1 ISM slot, 256MB CF default, 512MB DRAM default, IP Base Cisco 2921 with 3 onboard GE, 4 EHWIC slots, 3 DSP slots, 1 ISM slot, 256MB CF default, 512MB DRAM default, IP Base Cisco 2951 with 3 onboard GE, 4 EHWIC slots, 3 DSP slots, 1 ISM slot, 256MB CF default, 512MB DRAM default, IP Base
What power supply options are available for the Cisco 2911?
● On the Cisco 2911, 2921, and 2951, an optional DC power supply is available that extends deployment into central offices and industrial environments. ● On the Cisco 2911, an optional DC-PoE power supply is available.
What are the onboard WAN ports on the Cisco 2921 and 2951?
● All onboard WAN ports are 10/100/1000 Gigabit Ethernet WAN routed ports. ● One of the three 10/100/1000 Ethernet WAN ports on the Cisco 2921 and 2951 supports Small Form-Factor Pluggable (SFP)-based connectivity in lieu of a RJ-45 port and enabling fiber connectivity.