How wide should curtains be for 100 inch window?
For example, if the window is 100 inches wide, the curtains should be made to 125 inches wide in order for them to hang off the window when in the open position. For an inside-mount curtain, measure from one edge inside the frame to the inside edge on the opposite side.
How wide should each curtain panel be?
How Wide Should Curtains Be? To ensure that panels look ample and drapey when closed, they should have a combined width that is 2 to 2½ times the width of the window. Exceptions: If you’re hanging curtains just to frame a window and don’t intend to shut them, you can round down to 1½ times the width.
How do you fix too narrow curtains?
Pre-made curtain panels that are too narrow for your windows can still be used in combination with panels of a second fabric. Because you are unlikely to find fabric that matches existing curtain panels exactly, the best approach is to use fabric of a similar weight that complements the color or pattern of the panels.
How wide should curtains be for fullness?
Measure the width of the rod from left to right. A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.
How much wider should curtains be than Windows?
How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod. That means if you are ordering Grommet style or Rod-pocket style, the total drapery width should be at least 2 times the window/rod widths.
Can curtains be too wide?
Having a length in mind for your curtains might also affect how wide you decide to go. A cafe length curtain that’s too wide will look completely unbalanced, after all. Of course, for living rooms and bedrooms, you’ll most likely be looking for curtains that graze the floor.
How do you connect two drapery panels?
How to Connect Curtain Panels Without Sewing
- Place one panel face up on a large flat surface.
- Draw a line with a washable fabric marker and a straight edge that is 1/2 inch from the side edge of the top panel.
- Load a fabric stapler with staples and then staple the two panel layers together along this one seam.
Can you join two pairs of curtains together?
Place the curtain panels on top of one another, right sides together. Then pin the vertical edges you unpicked together. If your fabric is quite thick you may opt to clip the two panels together instead. If you’re working with patterned panels check that the pattern matches before and after pinning.
How far should curtains extend past window?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
How far below window should curtains hang?
While fashion once dictated a “flood level” bottom line for curtains—one that hung just past the window sill, short enough that it would not get wet in a flood—today, style calls for curtains to either hang down to within ½-inch of the floor or even puddle slightly.