Is 22RE a good engine?
The 22R and RE are by far the most reliable engines Toyota ever built, I had three pickups with both the 22R and RE engines and never had a problem. All of them had well over 200,000 miles on them.
What does 22R mean?
To keep the convention standard, R is used to represent 0. Because of problems in seeing the decimal point in some printed texts, the 3 letters: K M or R are used in place of the decimal point. Thus, a 2,700 Ohm resistor is written 2K7 and a 6.8 Ohm resistor is written 6R8. And 22R means 22.0 ohms.
Is the 22R fuel-injected?
Toyota Motor Corporation produced the 2.4-liter 22R four-cylinder engine from 1981 to 1995, and introduced its fuel-injected 22RE version in 1982.
Why did Toyota stop making the 22RE?
Why Did Toyota Stop Making The 22Re? Production lasted from 1985 to 1988 for the turbocharged 22RTE. During 1985, the engine underwent substantial revisions in order to eliminate timing chain issues. For this reason, 22RE parts not compatible with pre-1985 engine models are fewer and fewer engines are built.
Why is 22R so good?
Although a turbocharged version was available, the long-stroke 22R and 22RE are at their best when operated as low-power (right around 100 horses), task-focused engines that deliver good low-end torque (thanks to their long stroke) and fuel efficiency for their size.
How long will a 22R engine last?
How Long Do 22R Engines Last? It is indeed true. Parts that are well designed and made. The average vehicle should reach 400,000 miles after being serviced.
Are 22R and 22RE blocks the same?
22r and 22re are the same blocks. ’85 and up have a “lazer block” which has a slightly shorter deck height. The older blocks are taller so if you mis-match blocks and heads the accessory brackets will not line up just right but they will work. The heads off a 22r will NOT work on a 22RE intake.
How much HP does a 22R have?
22R
| Code | Power | Comments |
|---|---|---|
| 22R | 72 kW (97 hp; 98 PS) at 4,800 rpm | carb, dual row timing chain (’81–’82) carb, single row timing chain (’83–’90) |
| 22R | 81 kW (109 hp; 110 PS) at 5,000 rpm | |
| 22R-E | 78 kW (105 hp; 106 PS) at 4,800 rpm | EFI, single row timing chain |
| 22R-E | 84 kW (113 hp; 114 PS) at 4,800 rpm |
Can you turbo a 22R?
If you are considering a supercharger or turbocharger for your 22R or 22RE engine, there are a few things you should know. You can run a turbo or supercharger on a stock motor with a factory EFI unit, but you must limit the boost to 4-6 lbs.
What is the most reliable 4 cylinder engine?
Without further ado, here are the 10 most reliable four-cylinder engines ever built.
- 1 Honda K-Series. Via EngineLabs.
- 2 Volkswagen 1.9 TDI ARL. Via B-Parts.
- 3 BMW S14. Via Pixabay.
- 4 Ford Focus ST EcoBoost. Via YouTube (exoroxx channel)
- 5 Volvo Redblock B230FT. Via eEuroparts.com.
- 6 SAAB B234R.
- 7 Kia Soul 1.6-Liter.
- 8 Subaru EJ20.
Why is the 22R so good?
How can I make my 22R more powerful?
Top 6 22R/RE Proven Performance Upgrades
- Header. A header (exhaust manifold) is one of the best “bang for your buck” bolt-on performance upgrades for your 22R series engine.
- Cold Air Intake. A great compliment to a header upgrade is a cold air intake kit.
- Electric Fan Kit.
- Cylinder Head.
- Big Bore Throttle Body.
- Flywheel.
What’s the difference between 22R and 22RE?
The 22R had round exhaust ports and the 22RE had keyhole-shaped exhaust ports. The 22RTE, which powered some pickups and 4Runners, derived from the 22RE, but with a different head and block, dished pistons and combustion chambers shaped differently.
What cars have a 22RE engine?
What cars have the 22r engine? In addition to the Celica, the 22R powered the 1981 Toyota Corona, 1981 to 1988 Hilux pickup, 1981 to 1985 pickup and the 1984 4Runner. The 22RE powered the 1985 to 1995 Hilux, the 1985 to 1995 standard pickup and the 1985 to 1995 4Runner.
What’s is normal compression for a 22R?
The 22R engine features a cast-iron block and aluminum cylinder head with the single overhead camshaft (SOHC) and two valves per cylinder (8 in total). Compression ratio rating is 9.0:1 . Cylinder bore and piston stroke are 92.0 mm (3.62 in) and 89.0 mm (3.5 in), respectively.
How much does a 22R weigh?
yeah a 22r only weighs around 300 lbs. a small block longblock only weighs around 450lbs. and I’d say that the small block we had on the kragen 1000lbs stand, only weighed 600lbs with the cast iron manifolds and marine gear on it.. but it flexed pretty crazy when we had to roll it across the shop. i like the extra wheel because i have to move