In some occasions, you will have to write an essay in the extremely short amount of time on the exam in college or high school. Also, you may be a little bit of a procrastinator, and find yourself in a situation when the paper is due tomorrow morning, and you have not even chosen the topic yet. Even though a last-minute essay cannot look as great as a work prepared successively and carefully within the whole time given, you still have a chance to submit a decent paper. The working process will require your full attention and a lot of effort, even if you are assigned a simple essay. However, if you learn the next few tips, the essay writing will seem significantly easier and feasible even when you are short on time.

Firstly, clean up your working space to get started. Make sure you have everything you need on the table, take a pen, a few sticky notes, your laptop, and read through the assignment requirements. In case no prompt is given, search for good essay topics, and pick a few uncommon and interesting ones you will be able to write about. Making a final choice, think which topic is the most relevant to your current studies and will not take too much to research.

Afterwards, look for the most trustworthy sources or the ones you are certainly allowed to use. If you are not sure, access the online library or any free services where you can look for the books and articles for your essay. Use sticky notes to write down the information and put them in front of you to see how much data has been gathered and if you need to continue researching. Reread these notes from time to time and cross out the info you do not find relevant anymore.

When you have the data you need to produce a quality work, it is crucial to think about the structure of the future paper. If you are not sure how to write an essay outline properly, check what your essay type is first. Each type is organized differently, so you need to look up the structure every time you are given an essay homework. You can also search for an example of the essay on your topic, and adhere to its outline. No matter what kind of essay you are going to write, it is important to start with a thesis statement. It should declare what problem you will review in the paper, and which facts or arguments you will use to do it professionally. As these arguments will be discussed in the main part of the essay, outline the body paragraphs and put down a few sentences with the rough description of each paragraph. Think of the way you will engage the reader in the introduction, and which thought will be conclusive for the paper. When the direction of the work is clear from the outline, use it to draft the first version of the essay.

If you are not used to model essay writing, do not worry - your draft should not necessarily look like a masterpiece. It is only the depiction of your thoughts, and as you will have them written down, it will be easier to create a good essay. There is no best way to write an essay, so trust the working methods you usually use. You may like taking short breaks once in a few minutes, or write everything in one sit - just make sure to keep the focus on writing and avoid the urge to call a friend or watch something online. Thus, you will finish the paper faster, and will not feel guilty for engaging in other activities afterwards.

Do not forget to go through the essay a few times after the completion. Everyone makes typos and mistakes by accident, but it is about you to find and fix them before your teacher does. If you need help with an essay editing, try asking a friend or a family member to read and analyze your work. Also, you can order editing services in case your paper needs to be perfectly polished so that you can submit an ideal essay and get an excellent grade.

As these steps are simple to follow, you will not have any problems coping with an essay on time. Try the whole procedure at least once, and you will not have to use any other tips preparing an essay paper during your studies!

What does GPS NO FIX mean?

No fix means it has not received enough satellites or a good enough reception to get a 3D fix and establish location but it does “see” the GPS. In other words it is communicating with the GPS, there is just not enough data to establish a fix.

How do I turn off GPS in ArduPilot?

Overview. The GPS Failsafe is enabled by default but you can enable or disable it on the Mission Planner’s Standard Parameter List, by set the FS_GPS_ENABLE parameter to 0 (Disable) or 1 (Land) or 2 (switch to AltHold).

What is APM in ArduPilot?

APM Planner 2.0 is an open-source ground station application for MAVlink based autopilots including APM and PX4/Pixhawk that can be run on Windows, Mac OSX, and Linux. Configure and calibrate your ArduPilot or PX4 autopilot for autonomous vehicle control.

How do I connect my GPS to ArduPilot?

UBlox GPS Configuration

  1. Connect Pixhawk to your PC and connect with the Mission Planner.
  2. On the Flight Data screen press Ctrl-F and then select “MAVSerial pass”
  3. Open u-center and select Receiver, TCP Client and in the Network Connection window set Address to “localhost” and Port to “500” and press OK.

How do I fix my GPS on my Android?

How to Fix GPS Not Working Issue

  1. Check the GPS Status.
  2. Switch the GPS Off and On.
  3. Restart Your Smartphone.
  4. Deactivate the Airplane Mode.
  5. Charge the Device’s Battery.
  6. Clear the Cache of the Maps App.
  7. Improve the Accuracy of the Location Services.
  8. Easiest Way to Fix GPS Not Working Issue.

Why is my GPS not working correctly?

Your GPS might not work if the intended app is buggy or is lacking far behind. If you use Google Maps, kindly head over to the Play Store to update the app to the latest version. If you’re rocking the latest version, try clearing the app’s data and cache below. Clear cache from the map app.

Does Ardupilot need GPS?

ArduPilot automatically configures the GPS soon after startup so there is no need for any GPS related calibration. The compass must be calibrated however….LED Indicators.

LEDs: Behavior:
Power Solid red when powered
GPS lock Flashing blue when 3D GPS lock acquired

What is an APM tool?

APM refers to application performance management or application performance monitoring and is an essential tool to help optimize and monitor the performance of your apps. You could argue that application performance management and application performance monitoring are the same things.

Does Pixhawk have GPS?

GPS configuration on Pixhawk is handled transparently for the user – simply connect the GPS module to the port labeled GPS and everything should work. The default Serial Port Configuration works for most devices.

How do I set up my Ublox GPS?


  1. Open u-center.
  2. Connect to GPS module (default port is COM3, baudrate 9600).
  3. Go to View > Configuration View.
  4. Click MSG (Messages) on the left side list. For Enabling:
  5. Switch to CFG (configuration) tab in left side list. Select Save current configuration.
  6. Click Receiver > Action > Save Config:
  7. Done.

How do you reset GPS on Android?

Android GPS Toolbox Click the menu button, then click on “Tools.” Click on the “Manage A-GPS State” option, and then the “Reset” button to clear your GPS cache. Go back to the previous menu and do the same thing.