What is panel bonding adhesive used for?
Note: Panel Bonding Adhesive should only be used to bond structural components such as pillars, rockers or frame members when specified by an OEM (Example: Aluminum Ford F-150). Unless specified by an OEM, structural components should be welded.
How strong is Panel bond adhesive?
I read somewhere that a normal weld has a tensile strength of 1500 psi where the 3m panel bond has a tensile strength of 3,000-4,000 psi. So the Adhesive is plenty strong for the project I am working on Heck, Mercedes, BMW etc has some cars now that are almost completely glued together using this type of adhesive.
What is the difference between 3M 8115 and 8116?
8116 is rated by GM, Ford and Mopar for structural repairs, 8115 is not. Not that there’s a huge difference. 8115 has a 90-minute working time and a 4-hour clamping time, 8116 has a 120-minute working time 6-hour clamping time. They both cure in 24 hours.
How long does 3M Panel Bond take to dry?
Equalize the Mix Nozzle: Dispense a 1 to 2-inch (25 to 50 mm) line of adhesive through the mixing nozzle and discard. 3M™ Panel Bonding Adhesive has a work time of 90 minutes. For best results, adhesive should be immediately dispensed once a new mix nozzle has been equalized.
What is 3M panel bonding adhesive used for?
The 3M™ Panel Bonding Adhesive is a two-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass). The primary use is to replace quarter panels, roofs, box sides, van sides, utility vehicle sides and door skins.
Can you put body filler over 3M Panel Bond?
You can apply fillers over Epoxy based structural adhesives (the slower drying ones, usually states epoxy on the tube). Urethane structural adhesives are the types you can not apply fillers over as they wont adhere properly, their your 5 & 15 minute drying panel bonds….
Is Panel bond stronger than welding?
Welding Versus Body Panel Adhesive Metals also undergo less distortion and are at a lower risk of damage, making the bond strong and durable.
Is 3m Panel Bond Sandable?
Panel bond seams come apart easily under heat. It is also sandable so if you don’t get it cleaned up right away just sand it off. You can create a very nice seam that way also. Like others said you cannot weld through it or near it unless you are using a spot welder (pro spot) or similar machine.
What is the strongest adhesive?
The name of the world’s strongest adhesive is DELO MONOPOX VE403728. This is a modified version of the high-temperature-resistant DELO MONOPOX HT2860. This epoxy resin forms a very dense network during heat curing.
Can you paint over 3M Panel Bond?
The 3M 08115 Panel Bonding Adhesive can be painted over with an automotive 2K paint system; however, a self-etching primer should not be used with this product. If the 3M 08115 Panel Bonding Adhesive has cured for over 24 hours, it should be scuffed/abraded to reduce the gloss for proper paint adhesion.