What is stateless autoconfiguration in IPv6?
Stateless address autoconfiguration is the process that IPv6 nodes (hosts or routers) use to automatically configure IPv6 addresses for interfaces.
How do I find my IPv6 DNS?
In this procedure you use the nslookup command to display DNS IPv6 PTR records.
- On the command line, type the following command: % /usr/sbin/nslookup.
- To see the PTR records, type the following command at the angle bracket prompt: >set q=PTR.
- Quit the command by typing exit.
Does DNS work with IPv6?
DNS can translate domain names to both IPv4 and IPv6 addresses. To translate a domain name to an IPv4 address, add an A record set. To translate a domain name to an IPv6 address, add an AAAA record set.
Does dynamic DNS work with IPv6?
Unfortunately, many dynamic DNS providers have implemented their IPv6 support equivalently to IPv4, even though it does not really make sense. That is, a dynamic DNS client can update its own AAAA record using some web API call, and that’s it.
What is IPv6 address autoconfiguration?
A host performs several steps to autoconfigure its interfaces in IPv6. The autoconfiguration process creates a link-local address. The autoconfiguration process verifies its uniqueness on a link. The process also determines which information should be autoconfigured, addresses, other information, or both.
Why is it beneficial to use stateless DHCPv6?
Stateless DHCPv6 enables a device that has obtained an IPv6 address/prefix to get other configuration parameters from a DHCPv6 server.
Can you nslookup IPv6?
You can use the nslookup command to display IPv6 name service information. Under your user account, run the nslookup command. The default server name and address appear, followed by the nslookup command’s angle bracket prompt.
What is the best DNS for IPv6?
IPv6 IP addresses use colons.
- Google: 8.8. 8.8 & 8.8. 4.4.
- Quad9: 9.9. 9.9 & 149.112. 112.112.
- OpenDNS: 208.67. 222.222 & 208.67. 220.220.
- Cloudflare: 1.1. 1.1 & 1.0. 0.1.
- CleanBrowsing: 185.228. 168.9 & 185.228. 169.9.
- Alternate DNS: 76.76. 19.19 & 76.223. 122.150.
- AdGuard DNS: 94.140. 14.14 & 94.140. 15.15.
How do I use IPv6 DNS?
How to Add IPv6 Addresses to DNS
- Become superuser on the primary or secondary DNS server for your IPv6 network.
- Edit the appropriate DNS zone file by adding AAAA records for each IPv6–enabled host, as follows. host-name IN AAAA host-address.
- Edit the DNS reverse zone file and add PTR records, using the following format.
Is IPv6 DNS the same as IPv4?
IPv4 addresses use the first 24 bits of the address as an optional subnet mask. In IPv6, addresses are divided into a 48 bit routing prefix, a 16-bit subnet ID (together these two define the subnet), and an Interface ID used for hosts only. Thus, IPv6 enables 65K more subnets than in IPv4.
Does no-IP work with IPv6?
No-IP now supports the creation and setup of IPv6 (AAAA) records via the web interface. This is a feature available to our Plus Managed DNS users that have already received IPv6 records from their ISP or bandwidth provider.
What kind of DNS records do IPv6 addresses use?
An AAAA (pronounced quad A) record is a DNS record that maps to an IPv6 address. AAAA records are available for all customers. Currently, IP addresses are based on version 4 of the internet protocol, where there are 4 sets of numbers ranging from 0-255.