What is the difference between J and L track lighting?
If the contact-tips are 1 inch apart, it is likely a “J” type, but if they are 7/8 inch apart, the track is likely an “L” type. Many systems now use a single live and then use digital control interfaces such as DALI to control the fittings. This means that each fitting can be independently controlled.
Can I install track lighting myself?
With thorough planning and a little care, however, you can install track lighting in just one afternoon. You just need to figure out the length of track you need, where you want it, how to fasten it to the ceiling, and how to connect it to a power source.
How many LED lights can you put on a track?
A general track lighting rule is to add no more than one fixture per foot. A 15-amp, 120-volt lighting circuit can support a total of 1,800 watts, but you must deduct 20 percent from the total wattage to avoid overloading the circuit, so the safe capacity of the lighting circuit equals 1,440 watts.
What are the different tracks for track lighting?
There are three types of track: H, J, and L. The terms come from the manufacturers that set the standards for each type: Halo, Juno, and Lightolier. The different types do have some similarities.
How do I choose the right track lighting?
To pick the right fixtures for your track lighting system, you must determine if the fixtures are compatible with the track system in place. Also, consider what is being illuminated. Fixtures that are installed to illuminate artwork are usually different from light fixtures used for general lighting.
What is the most common track light type?
Heads: Heads are the most common type of track lighting. Track lighting heads resemble spotlights and can be angled to highlight specific areas.
Is track lighting outdated 2020?
Track lighting is a contemporary fixture that’s as perfect for new construction as it is for renewed spaces in existing homes.
What is the difference between fixed and linear track lighting?
Another entry often found under track lighting are fixed rail lighting fixtures. While they are installed on a track, they are different from a track lighting system in that fixed rail lighting is usually mounted to the wall, rather than the ceiling. They are often found in bathroom lighting, over vanities.
How many lumens do I need for track lighting?
A single unit of track light can provide illumination of around 500 lumens at 8 watts. Whereas a recessed light at 8 watts provides illumination of around 640 lumens and a BR30 bulb at 8 watts provides illumination of around 720 lumens.
What is the difference between H track and L track?
They differ in the way they each fit into the track. The adapter of a “H” fixture has three silver colored contacts – two on one side, and one on the other. An “L” fixture has two silver contacts shaped. Like a propeller.
Are all track light tracks the same?
Not all lights are compatible with the different tracks. The three standard systems that exist are Halo, Juno, and Lightolier. They are compatible with a variety of fixtures. It’s best to stay away from proprietary systems or you’ll be restricted to the fixtures of the same brand of your track system.