What length bar is best for chainsaw?
16 to 18-inch
Recommended chainsaw bar length for home use A 16 to 18-inch bar should be enough to get the job done. This longer bar length will also work for cutting down small trees or removing shrubs.
Does bar length matter on chainsaw?
For example, larger chainsaw bars work best with more powerful saws because it takes more energy to drive a chain around a long bar. That’s why electric saws use bars 18″ and shorter. Similarly, chainsaw chains are measured to fit certain bars.
Is a shorter chainsaw bar better?
They are usually sold with a bar length near the limit of their capability. Reducing the bar length puts the saw more within the sweet spot of the saws capability.
Why do Loggers Run chainsaw bars upside down?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
How big of a tree can a 20 inch chainsaw cut?
36-inch
A good rule of thumb is that the diameter of the trees you cut regularly should be no more than twice the length of the bar on a chainsaw. That means a 20-inch chainsaw can handle a 36-inch tree (remember, effective cutting length is roughly -2 inches of the bar length).
What size chainsaw do I need for a 36 inch bar?
A good rule of thumb is that the diameter of the trees you cut regularly should be no more than twice the length of the bar on a chainsaw. That means a 20-inch chainsaw can handle a 36-inch tree (remember, effective cutting length is roughly -2 inches of the bar length).
Can you switch chainsaw bar length?
eHow may earn compensation through affiliate links in this story. Replacing your chainsaw bar will require a few measurements. Most chainsaws can operate up to three different bar sizes. Guide bars are measured in length, from the tip of the bar to the heel, and range in size from 14 to over 40 inches.
Does a bigger chainsaw cut faster?
About any saw will cut about anything if given enough time and patience, the larger the saw the faster it’ll cut big wood and with less effort and not having to make multiple cuts all the time, cutting from both sides to make it through the log.
How long does a chainsaw chain stay sharp?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
Can I change chainsaw bar length?
Most chainsaws can operate up to three different bar sizes. Guide bars are measured in length, from the tip of the bar to the heel, and range in size from 14 to over 40 inches. Check the specifications in your model’s operator’s manual to see what size bars you can run on your saw.
How long is a standard chainsaw bar?
Standard chainsaw bar lengths are between 8–24 inches (20–61 cm). The true length of the chainsaw bar will always be longer than the cutting length.
How do I know what size chain saw bar I have?
Your chain saw bar may have the information you are looking for stamped right into it. It can usually be found near the back of the bar, where it mounts to the saw. For instance, in the example on the right, the chain is 3/8” pitch and.050” gauge with 72 drive links.
Can you put a longer guide bar on a chainsaw?
Most chainsaws ship with a guide bar that is reasonably sized relative to the saw capacity, but could actually run a longer one. Swapping the original bar for a longer model is often useful, as it may give you just the bit of additional cutting capacity you need in felling or bucking.
What size guide bar and chain do I Need?
If you have a yard with a couple of larger trees, you might need to consider a marginally longer guide bar and chain. A bar length of between 14 to 18 inches should work well for you much of the time.