Why is my Zanussi fridge not cold?
The temperature can increase after loading a big amount of fresh food, use the shop mode to decrease the temperature quicker. 3. Check whether the fan inside the appliance is on and running (if your appliance has a fan). You can check the fan by closing the door for a moment and opening it again.
Why is my integrated fridge not cold?
Dirty condenser coils If you have fridge cooling problems, check that your condenser coils are clean. If they’re not, use a cleaning brush (they make coil cleaning brushes specifically for this purpose) and vacuum cleaner to get them clean.
Why is my Zanussi fridge not working?
You can check this by unplugging the appliance and plugging in a lamp for example. Switch off the socket and unplug the appliance. Plug the appliance back in and switch on the socket. After switching back on, check the internal lamp comes on or check for the noise of the compressor.
How do you reset a refrigerator that is not cooling?
Pull the unit away from the wall and unplug it. Check the owner’s manual for any “off” or “zero” settings in your fridge and freezer and set them to off or zero. Plug the unit back in and adjust the temperature controls of both to your desired setting. Give the fridge about 24 hours to cool to your set temperature.
What is the first thing to check when refrigerator stops working?
If Your Fridge Has Stopped and the Light is Off As obvious as this sounds, often a fridge shuts down completely because it’s simply getting no power. The first thing to check is the breaker (in your home’s electrical service panel) of the circuit serving the fridge.
How do I make my Zanussi fridge colder?
A digital control will be within the trim of the fridge. Adjust the temperature by turning the temperature regulator or via the control panel. the temperature dial will usually start at 1 – this will be the lowest (warmest) temperature you will then be able to adjust up or down to a suitable temperature.
Why is my fridge not cooling but the light is on?
The fridge may not be working properly if it’s not chilling properly. This could be because the evaporator fan is not working optimally. If the compressor is working, but the fridge still doesn’t cool, then the fans are typically the problem that needs to be resolved.
How do you fix a warm fridge and cold freezer?
Iced-Up Evaporator Coils The evaporator coils are where the air goes to cool down. However, if they’re covered in frost, the air can’t pass through efficiently and won’t get adequately cool, resulting in a warm fridge. A quick fix is to defrost the coils with a hairdryer, which will temporarily solve the issue.
What number should a Zanussi fridge be set at?
Resolution. You should keep your fridge temperature set at or below 4°C and your freezer set at -19°C (or -18°C, depending on your model). Increase slightly the set temperature in the summer season. The optimal ambient temperature of the appliances should be 20-25°C.
Does unplugging a fridge reset it?
Unplug your refrigerator Disconnect your fridge from its power source by removing the power cord from the wall outlet. You may hear some whooshing or knocking noises after you do so; that’s normal. Make sure your fridge stays unplugged for several minutes, otherwise the reset won’t work.
What to check if refrigerator stops cooling?
Fridge Still Not Cooling? Follow These Steps to Diagnose & Fix it
- Condenser coils are dusty. There are coils located under or behind the fridge that cool and condense the refrigerant.
- The condenser fan is broken.
- The evaporator fan is broken.
- Evaporator coils are covered in frost.
- Air inlet damper is broken.