Do I have to connect the parking brake wire on Pioneer stereo?
(AVH-X5800BHS) Anyway, it requires the Brake Interlock system to be wired up. The Pioneer manual states: “Light green wire: Used to detect the ON/OFF status of the parking brake. This lead must be connected to the power supply side of the parking brake switch.”
What color is Pioneer parking brake wire?
light green wire which is the parking brake wire that comes with the Pioneer harness.
Where do you connect the pink wire?
The white wire should be connected to the white wire. If you want the wall switch to turn off the light/fan, you need to hook the pink wire in the box to the black wire on the controller. You can prevent the switch from turning off the light by connecting black to black.
Where do I connect key 1 and key 2 wires?
Key 1 and 2 are used for steering wheel control as well as some other applications like radios. You need to connect the key 1 or key 2 with the original steering wheel control wire. The button light control wire is referred to as “Illum” wire.
How do I connect my pioneers Green parking brake to microbypass?
Connect the green wire from your MicroBypass to your Pioneers green parking brake wire. (usually a 4 ft light green wire) While it is a cool add on option to enjoy while driving we recommend you and every shop customer to understand that it is against the law to have a movie playing while driving.
How do I connect the Pioneer Blue to the microbypass?
Connect Blue wire from MicroBypass to the Pioneers Blue w/White wire (Amp Turn on). Not the solid blue wire. Connect the black wire to the either the factory ground wire, the pioneers black ground wire or its own chassis ground. You can also share a connection with your new radio.
Is there a way to disengage and engage the parking brake?
There would be no way to do or mimic the function of “disengaging and engaging the parking brake.” Unless I’m missing something. True, good point. I didn’t think about that because there’s no way in hell my kids will drive my car when they are old enough.
How to hook up pioneers Blue to a new radio?
This switch mounts behind your new radio and works perfectly. Best part is that you can install it in about 1 minute tops! Connect Blue wire from MicroBypass to the Pioneers Blue w/White wire (Amp Turn on). Not the solid blue wire.